Product Manual

Page 7 of 14
4. The arm (5) that guides the hose on and off the reel can be repositioned for better function as
shown in the picture below.
Wall Floor Ceiling
Repositioning the Arm
1. Pull out the hose until the reel latches.
2. Remove the four sets of nuts and washers holding the arm to the base.
3. Turn the arm to a desired position, aligning the arm mounting holes with the holes in the
flange of the base, and retighten the nuts and washers.
Before Each Use
⚠WARNING
 Ensure that the reel is properly installed before connecting input and output hoses.
 Before connecting a pressure source, ensure that the supply pressure does not exceed maximum
working pressure rating of reel.
 Inspect the hose reel fittings, alignment, hoses, and components periodically before use.