Product Manual

Page 4 of 17
Intended Use
The Air Nibbler is ideal for nibbling plastic, tin, aluminum and other metals up to 18-gauge rolled
steel. Accurately cuts 1 7/32 in. radius without distorted edges.
Technical Specifications
Item
Description
Air Consumption
3 CFM
Cuts Per Minute
2600 CPM
Cutting Radius
5.5mm
Cutting Capacity Steel
18 gauge
Cutting Capacity Aluminum
18 gauge
Cutting Capacity Sheet Metal
18 gauge
Maximum Cutting
4.43 FPM
Air Inlet Size
1/4 in. NPT
Minimum Air Hose Size
3/8 in.
 Read and understand all instructions. Failure to follow all instructions may result in
serious injury.
 The warnings, cautions, and instructions in this manual cannot cover all possible
conditions or situations that could occur. Exercise common sense and caution when
using this tool. Always be aware of the environment and ensure that the tool is used in a
safe and responsible manner.
 DO NOT allow persons to operate or assemble this product until they have read this
manual and have developed a thorough understanding of how the product works.
SAVE THESE INSTRUCTIONS