Product Manual

Page 7 of 12
INFLATOR KIT USE AND CARE
 USE COMPRESSED AIR ONLY. Use clean, dry, and regulated compressed air to power the
tool. Do not use oxygen, carbon dioxide, or any other bottled gas as a pressure source for
this inflator kit.
 Do not force the kit. Pneumatic tools do a better and safer job when used in the manner for
which they are designed. Plan your work, and use the correct tool for the job.
 Check for damaged parts before each use. Carefully check that the inflator kit will operate
properly and perform its intended function. Replace damaged or worn parts immediately.
Never operate the kit with a damaged part.
 Do not use the inflator with a malfunctioning gauge or trigger. Malfunctioning components
must be repaired by an authorized service representative.
 Disconnect the air supply from the inflator before making any adjustments, changing
accessories, or storing the kit. Such preventive safety measures reduce the risk of accidental
pressure release.
 Store the kit when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the kit for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with the inflator.
Accessories that may be suitable for one tool may create a risk of injury when used with
another tool.
 DO NOT EXCEED the maximum air pressure of 150 PSI. Before using this inflator, verify
that all equipment in the system can withstand this air pressure. Ensure the working air
pressure in the system is lower than the lowest rated component.