Product Manual

Page 4 of 16
Intended Use
The 2-in-1 Air Needle Scaler and Hammer can be used as an air needle scaler or air hammer.
Delivers 4,600 blows per minute to remove scale and rust, or use it to hammer away with the 4
included chisels. A lightweight composite housing keeps the tool weight down to 2.8 lbs. and low
vibration design provides comfort to the user.
Technical Specifications
Item
Description
Blows Per Minute (BPM)
4600
Air Consumption
6 CFM
Operating
90 PSI
Needles
12
Needle Length
4.92 in.
Needle Diameter
0.118 in.
Air Inlet Size
1/4 in. NPT
Minimum Air Hose Size
3/8 in.
Steel Chisels
(1) Punch, (1) Cutter, (1) Straight, (1) Edger
Replacement Chisels: SKU 154400
 Read and understand all instructions. Failure to follow all instructions may result in
serious injury.
 The warnings, cautions, and instructions in this manual cannot cover all possible
conditions or situations that could occur. Exercise common sense and caution when
using this tool. Always be aware of the environment and ensure that the tool is used in a
safe and responsible manner.
 DO NOT allow persons to operate or assemble this product until they have read this
manual and have developed a thorough understanding of how the product works.
SAVE THESE INSTRUCTIONS