2 Volt Heavy-Duty Air Inflator Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing a Klutch product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air inflator is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Klutch 12 Volt Heavy-Duty Air Inflator is designed for everyday use — from inflating a soccer ball to filling a flat tire. It can be used for air mattresses, inner tubes, trucks, SUVs, RVs, and other full-size vehicles. Technical Specifications Property Motor Maximum Power Maximum Working Pressure Recommended on/off Cycle Time Specification 12V 45A 150 PSI 20/30 min Important Safety Information ⚠WARNING Read and understand all instructions.
Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry.
Specific Operation Warnings ⚠WARNING Read and understand owner's manual before use. Do not exceed the tire's rated pressure. Always wear gloves. Some exposed parts may become hot during use. Use extreme caution when connecting the unit to a power source, as batteries can vent explosive gasses. Do not use the unit for pumping, compressing, or transferring any gas or liquid other than air. The unit is not designed for the sourcing of breathable air.
4. Connect the RED power clip to a POSITIVE 12 volt source and the BLACK power clip to a NEGATIVE ground point. 5. Test the connections by switching the inflator to “on”. Air will begin to flow. 6. Connect the air hose by screwing the brass inflator onto the tire valve stem. Only finger tighten the inflator. Do not use any tools as you may damage the inflator or the valve stem. 7.
Parts Diagram Page 8 of 12
Parts List Part Number Part Description Qty Part Number Part Description Qty 1 Sand Tray 1 28 Press Ring 1 2 Connection 1 29 Intake Valve Slice 1 3 Screw (6*25) 1 30 Rivet 1 4 Shockproof Pad 1 31 Cylinder Liner 1 5 Battery Clips 1 32 Seal Ring 1 6 Screw (5*15) 1 33 Intake Valve Slice 1 7 Check Ring 1 34 Sear Ring 1 8 Offset Wheel 1 35 Intake Valve Slice 1 9 End Cover 1 36 Rivet 1 10 Motor End Cover 1 37 Seal Ring 1 11 Bearing 1 38 Radiato
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
