2 Volt Dual Cylinder Air Inflator Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing a Klutch product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air inflator is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Klutch 12 Volt Dual Cylinder Air Inflator is ideal for owners of trucks, SUVs, or off-road vehicles with tires 35 inches and larger. Technical Specifications Property Motor Maximum working pressure Maximum re-start pressure Maximum continuous operating time Specification 12V 150 PSI 90 PSI 15 minutes Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Do not exceed the tire's rated pressure. Always wear gloves. Some exposed parts may become hot during use. Use extreme caution when connecting the unit to a power source, as batteries can vent explosive gasses. Do not use the unit for pumping, compressing, or transferring any gas or liquid other than air. The unit is not designed for the sourcing of breathable air. Compressed air and particulate matter can cause eye and soft tissue damage. Keep air stream away from skin and eyes.
4. Connect the RED power clip to a POSITIVE 12 volt source, BLACK power clip to a NEGATIVE ground point. 5. Test the connections by switching the inflator to “on”. Air will begin to flow. 6. Connect the air hose by screwing the brass inflator onto the tire valve stem. Only finger tighten the inflator. Do not use any tools as you may damage the inflator or the valve stem. 7.
Parts Diagram Page 8 of 12
Parts List Part Number Part Description Qty Part Number Part Description Qty 1 Handle 1 16 Plate assembly 1 2 Cover of handle 1 17 Rotor 1 3 Round head screw 1 18 Motor cover 1 4 Handle assembly 1 19 Stator 1 5 Inner hex screw 1 20 Back cover assembly of motor 1 6 Accessory box 1 21 Clamp 1 7 Cylinder head cover 1 22 Wool felt 1 8 Inner hex screw 1 23 Air inlet plate 1 9 Cylinder head assembly 1 24 Over current protector 1 10 Machine base Connecti
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
