Owner Manual

-
7
-
Step 5： Tune the zipline by tightening the turnbuckle, which will tighten up the line. Tighten line until it
K
appears,, to be nearly straight. DO NOT OVERTIGHTEN.
Install turnbuckle safety backup cable;
Note: The safety backup should be installed after all turnbuckle adjustments are finished. It must be removed
if future adjustments are required.
Slide the cable through both the sling cables
1
eye loops and the course cable's eye loop. Pull out slack until
you have a snug fit around the turnbuckle connection points.
Attach the two U-clamps on to overlapped sections of cable.
Turnbuckle safety backup cable
SUS304 main cable
U-Clamp
⑤ Take off the tighten tools(ratchet with strap,wire grip, sling cable on the Finishing Point