Owner Manual

-
3
-
and healthy, with at least a 36" circumference or 12" diameter.
If you're unsure about the area you would like to install your zipline, we recommend contacting a professional
to evaluate your property and/or help with installation.
• Beneath the cable, the course should be grassy, flat, and clear of all obstacles (bushes rocks, debris, hard
surfaces, etc.)
How High Should I Install My Zipline?
• That is depends on the preference and height of the kids using the zipline. As a general rule, we recommend installing
the finish point of the course 6ft to 8ft off the ground, and 2ft taller than the tallest rider.
• When picking the start point of the course, it needs to be higher than the finish point to create a safe angle
to ride down. We recommend giving the course an 8% slope.
Example:
If your tallest rider is 5ft tall, the length of your course is 80ft, your finish point should be at least 7ft
high, and your starting height is 13.4ft, Here is how we calculated it:
Finish point: height of the tallest rider(5ft)+2ft=7ft
Slope of course: length of course (80ft) x safe slope percentage(8%)=6.4ft
Starting height: slope of course(6.4ft) +finish point height(7ft)=13.4ft.