Assembly Instructions Ninja Slackline G Keep this manual for future reference.
SAFETY INSTRUCTIONS : • This product is not intended for public use. ONLY intended for domestic use. • Not suitable for children below 5 years of age. • Do not exceed maximum weight 250 LBS. • Since children have different development patterns, we suggest that adult supervision be required. • Inspect the strap before each use. Do not use when there is any abrasions, cuts, tears, burns, sew pattern damaged or alterations. If the strap is showing signs of wear, do not use, replace as necessary.
18 o 2 丨 丨 丨 丨 4 1 Carabiner Flat bar J A Buckles for flat bar Carrying bag After measure the distance of the trees 1 .Confirm the Ninja slackline height, then wrap and fasten the cushions around the two trees. 2. Put the Ninja slackline with ratchet end at the Start Point, then wrap the other end of line around the Finish Point and pull it back to the Start Point tree, make the line into double line. 3. Attach the hanging buckles to the Ninja slackline.
Hanging Buckle Installation a. Insert the strap into the parent buckle as below. b. Put the subsidiary buckle on the parent buckle and tighten the strap. 4. Th read the end of the Ninja slackline into the ratchet, pull the ratchet handle up and down until the double line is tight. Make sure the ratchet handle closed completely. NOTE: Check the position of buckles on the double line and ensure they are parallel. 5. Attach both ends of flat bar to the Ninja slackline at Start Point and Finish Point.
Flat Bar Installation 1. Attach the flat bar to the ninja line. 2. Put the bolt into the holes of flat bar. 3. Lock the bolt 6.Hook obstacles into carabiners, and make sure carabiners locked completely.
Ways to hanging climbing net, rope ladder (some for reference only) -5-
Release The Line 1. Unlock the ratchet by pulling out the release lever firmly. 2. While holding the release lever in horizontal line, pull the ratchet all the way open until it is released, then pull the line out from the straightened end . Support Links (YouTube) Please enter "DT0362C” to search for the video of assembly instruction.
