Specification Sheet
THX-6000-LCR(L/R)
THX-6000-LCR (L) THX-6000-LCR (R)
THE THX-6000-LCR IS A THX
®
ULTRA2 CERTIFIED LOUDSPEAKER.
It was designed primarily for front left-, center-, and right-channel
reproduction in large, ultimate-performance home theaters. It can
also be used for surround channels, however, and is equally suitable
for combination home-theater/music systems demanding superb
sound and high output capability. Its enclosure is front-ported to
facilitate installation in custom cabinetry and has back - panel 1/4” - 20
threaded inserts compatible with the Klipsch SB-9 mounting bracket
or any high quality wall/ceiling speaker mount rated for 40lbs or
higher load.
THE THX-6000-LCR DESIGN EMERGES DIRECTLY FROM KLIPSCH’S
EXPERIENCE AS A LEADING SUPPLIER OF CINEMA SOUND SYSTEMS.
A large, rectangular 90° x 60° Tractrix
®
Horn raises the efciency
of the speaker’s 1-inch titanium-dome compression driver tweeter
and optimizes its radiation pattern. The horn enables the speaker
to meet THX Ultra2 directivity specications without the lobing and
comb ltering effects that afict conventional multiple-tweeter
solutions. And its dual 6.5” woofers have large, magnetically shielded
motor structures that drive rigid, low-mass Cerametallic™ anodized-
aluminum vcones for high output and low distortion.
CONSTRUCTION IS TO THE HIGHEST STANDARD.
With a professional grade rabbet and dado locked panel cabinet and
premium components throughout to ensure sonic purity, consistency,
and reliability.
SPECIFICATIONS
FREQUENCY RESPONSE 48Hz - 20kHz ± 3dB
SENSITIVITY 97dB @ 2.83 volts / 1 Meter
NOMINAL IMPEDANCE 8 ohms compatible
HF CROSSOVER 1400Hz
POWER HANDLING 150 watts maximum continuous (600 watts peak)
ENCLOSURE TYPE Bass Reex via front-mounted port
ENCLOSURE MATERIAL Medium density breboard construction (MDF)
TWEETER
1” (2.5cm) magnetically shielded, titanium dome compression
driver with 9.6oz ceramic magnet structure.
HIGH FREQUENCY HORN 10” x 6” rectangular 90° x 60° Tractix
®
Horn
WOOFER
Two 6.5” (16.5cm) magnetically shielded, Cerametallic™ cone,
cast aluminium frame drivers
INPUT CONNECTIONS
Two sets of binding post speaker terminals (connected via
brass strap jumpers)
DIMENSIONS 15” (38.1cm) H x 17” (43.2cm) W x 12.5” (31.8cm) D (w/grille)
WEIGHT 39 lbs. (17.7kg)
FINISH Galaxy Black cabinet with Black anodized aluminum fascia
MOUNTING 4-Bolt pattern 1/4” - 20 thread
All specications are subject to change without notice. ©2019 Klipsch Group, Inc. Klipsch, Keepers of the Sound and Tractrix are
registered trademarks of Klipsch Group, Inc. a wholly-owned subsidiary of Voxx International Corporation.
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM/CUSTOM
Dual 6.5” Two-Way THX
®
Ultra2™
Certified LCR Loudspeaker