Specifications
FORTE IV SPEC SHEET | V01 | 201811
All specifications are subject to change without notice. ©2020 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation.
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
HIGH PERFORMANCE IS OUR FORTE
First introduced in 1985, the Forte quickly established itself as the most popular
Klipsch model. The elegant design and outstanding performance made the Forte a
standout among its competitors. In 2017, Klipsch re-introduced the Forte as part of the
Heritage speaker series. The new Forte IV features updated cosmetics and the latest
advancements in acoustic engineering, while maintaining the original charisma that
made the Forte so popular.
Don’t mess with perfection. We’ve made some important upgrades to the Forte IV,
but it remains relatively unchanged since its inception. Remember great sound?
We do, too. The Forte IV enclosure is still made in the USA, by proud craftsmen in
Hope, Arkansas. Just like Paul W. Klipsch (PWK) intended.
1
OF 2
DESIGNED AND MADE IN THE USA
USING DOMESTIC AND IMPORTED COMPONENTS
FORTE
3-WAY 12” HORN-LOADED LOUDSPEAKER
SPECIFICATIONS
FREQUENCY RESPONSE
(+/- 3 dB) 38Hz – 20kHz
SENSITIVITY
1
99dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 100W / 400W
MAXIMUM SPL 116dB Continuous
NOMINAL IMPEDANCE 8 ohms Compatible
CROSSOVER FREQUENCY HF: 5.2kHz
MF: 650Hz
HIGH FREQUENCY DRIVER
K-100-TI 1” (2.54cm) Titanium diaphragm
compression driver on a K-79T horn
MIDRANGE K-702 1.75” (4.45cm) Polyimide Compression
Driver mated to a K-703-M horn
LOW FREQUENCY DRIVER K-281 12” (30.48cm) Fiber-composite cone
woofer, KD-15 15” (38.1cm) Passive cone radiator
ENCLOSURE MATERIAL 3/4” MDF
INPUTS Dual binding posts / bi-wire / bi-amp
HEIGHT 35.75” (90.81cm)
WIDTH 16.63” (42.24cm)
DEPTH 13” (33cm)
WEIGHT 72 lbs (32.7kg)
1 Sensitivity in average listening room