User manual

DRAINAGE INSTRUCTION

The extracted water can be collected by water tank, or drained continuously

with a PVC hose (not available):

Use of Water Tank:

When the water drain mouth is blocked by the plug, the water will automatically run to the water tank.

When the water full indicator illuminates, the tank is full, and the compressor and the fan will stop

operation, please empty the water tank:

1. Remove the water tank as Fig 1. and empty it.

2. Insert gently the water tank into the unit reach to its original position.

Continuously drainage:

1. When you want to use this function, please firstly cut off the water

outlet blocking behind the panel by forceps.(See Fig.01)

2. Then take out the rubber drain stopper, and plug the discharge water pipe in. (See Fig.02 & Fig.03)

3. Pull out the water tank, and plug the rubber drain stopper in water outlet on the front panel, replace

the water tank into the unit, then you can operate the unit. (See Fig.04)

Fig.01 Fig.02

Fig.03 Fig.04

Filter Removal

•The filter can be removed from its slot by gripping the filter handle and

sliding it out from the back of the appliance.

• Every 2 weeks, remove the filter and clean it with warm water, below 40°C.

Allow it to dry naturally and then replace.