Cut Sheet

www.kleintools.com
See page 296 for additional information on warnings.
All dimensions are in inches and (millimeters).
Diagonal-Cutting Pliers
Heavy-Duty Diagonal-Cutting Pliers –
Tapered Nose
Additional Features:
•
Heavy-duty tapered nose design.
•
One-inch jaws easily reach into confined spaces.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight (lbs.)
D220-7 7-11/16" (195 mm) 1" (25 mm) 31/32" (25 mm) 1/2" (13 mm) standard plastic-dipped red .54
Refer to the insulated section for insulated pliers.
D220-7
Heavy-Duty Diagonal-Cutting Pliers –
All Purpose
Additional Features:
•
Heavier design for all-purpose use.
•
Tapered nose for easy working in confined areas.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight (lbs.)
D252-6 6-1/8" (156 mm) 13/16" (21 mm) 3/4" (19 mm) 7/16" (11 mm) standard plastic-dipped red .38
Bell System Type “W” Notches – Slit insulation cleanly
D252-6SW 6-1/8" (156 mm) 13/16" (21 mm) 3/4" (19 mm) 7/16" (11 mm) standard plastic-dipped red .33
D252-6
Standard Diagonal-Cutting Pliers –
Tapered Nose
Additional Feature:
•
Easy working in confined areas.
•
Spring-loaded action for self-opening (Cat. No. D202-6C).
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight (lbs.)
D202-6 6-1/8" (156 mm) 13/16" (21 mm) 11/16" (18 mm) 7/16" (11 mm) standard plastic-dipped red .29
D202-6C 6-1/8" (156 mm) 13/16" (21 mm) 11/16" (18 mm)
7/16" (11 mm) standard plastic-dipped red .31
D202-6
High-Leverage Diagonal-Cutting Pliers –
Stripping Holes
Additional Features:
•
Cleanly strips 12 and 14 solid AWG wire.
•
High-leverage design. Rivet is closer to the cutting edge
for 36% greater cutting power than other pliers designs.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight (lbs.)
D243-8 8-1/16" (205 mm) 13/16" (21 mm) 1-3/16" (30 mm) 7/16" (11 mm) standard plastic-dipped red .60
D243-8
12 – 14 AWG
High-Leverage Diagonal-Cutting Pliers – Ironworker’s
Additional Features:
•
Angled head design for easy working in confined spaces.
•
Hooked handle for improved grip.
•
High-leverage design. Rivet is closer to the cutting edge
for 36% greater cutting power than other pliers designs.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight (lbs.)
D248-9ST 9-3/16" (233 mm) 13/16" (21 mm) 1-3/16" (30 mm) 7/16" (11 mm) standard plastic-dipped red .68
D248-9ST
Pliers
Pliers
12