Cut Sheet

www.kleintools.com
See page 296 for additional information on warnings.
All dimensions are in inches and (millimeters).
Conduit Locknut and Reaming Pliers
Additional Features:
•
Tightens 1/2" and 3/4" EMT or 1/2" rigid locknuts.
•
Fits liquid tight fittings and caps.
•
Reams and deburrs both inside and outside of conduit.
•
Knurled jaws at nose tip pull wire or fish tape.
•
Machined nose fits snugly into locknut wings.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Point Thickness Handle Finish Handle Color Weight (lbs.)
D333-8 7-3/4" (197 mm) 1-5/8" (41 mm) 15/16" (24 mm) 1/2" (13 mm) 3/16" (4.8 mm) plastic-dipped yellow .55
D333-8
Tightens
Bodies & Caps
Cuchillas
Couteaux
Tightens
Locknuts
Cuchillas
Couteaux
Special Use Pliers
Plastic Cutting Pliers
•
Precisely cuts injection mold sprues, gates and other plastic.
•
Adjustable 1/16" hollow-head screw keeps knife-edges from
damaging each other (not designed for use on metal).
•
Spring-loaded for self-opening action.
Cat.No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight (lbs.)
D227-7C 7-11/16" (195 mm) 1" (25 mm) 31/32" (25 mm) 1/2" (13 mm) flush plastic-dipped red .55
D227-7C
End-Cutting Pliers
•
Wide throat clearance for clean, even cutting of wire
or nails at close range.
•
High-leverage design provides greater cutting power
at the knives than other pliers designs.
•
Extended handles for longer reach and increased leverage.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Handle Finish Handle Color Weight (lbs.)
D232-8 8-1/2" (216 mm) 3/8" (10 mm) 1-3/16" (30 mm) 19/32" (15 mm) 1-3/16" (30 mm) plastic-dipped red .71
D232-8
Slip-Joint Pliers
•
Shear-type cutter for precision wire cutting.
•
Two versatile jaw positions.
•
Serrated jaws provide sure-gripping power.
•
Nickel-chrome plated for long life.
D511-6
Slip-Joint Pliers – Hose Clamp
•
Quickly installs and removes spring-tension hose clamps.
•
Grips with either end or side of jaws for work in confined areas.
•
Nickel-chrome plated for long life.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Handle Finish Handle Color Weight (lbs.)
D514-8 8-1/16" (205 mm) 1-3/8" (35 mm) 1-1/4" (32 mm) 7/16" (11 mm) plastic-dipped blue .61
D514-8
Slip-Joint Pliers
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Handle Finish Handle Color Weight (lbs.)
D511-6 6-9/16" (167 mm) 1-3/16" (30 mm) 1-3/16" (30 mm) 3/8" (10 mm) plastic-dipped blue .39
D511-8 8-1/16" (205 mm) 1-3/8" (35 mm) 1-1/4" (32 mm) 7/16" (11 mm) plastic-dipped blue .62
511-10 9-3/4" (248 mm) 1-3/4" (44 mm) 1-3/8" (35 mm) 15/32" (12 mm) plain n/a .81
D511-10 9-7/8" (251 mm) 1-3/4" (44 mm) 1-3/8" (35 mm) 15/32" (12 mm) plastic-dipped blue .83
19
Pliers
19