Cut Sheet

www.kleintools.com
See page 296 for additional information on warnings.
All dimensions are in inches and (millimeters).
Heavy-Duty Long-Nose Pliers – Side-Cutting
Additional Features:
•
Induction-hardened cutting knives for long life.
•
Heavier design for greater cutting power.
•
Extended handles provide
added reach and leverage.
•
Cat. No. D203-8GLW features glow
in the dark grips to easily locate your
tool in dark or low lit areas.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Point Thickness Handle Finish Handle Color Weight (lbs.)
D203-8 8-7/16" (214 mm) 2-5/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 5/8" (16 mm) 1/8" (3 mm) plastic-dipped yellow .60
D203-8GLW 8-7/16" (214 mm) 2-5/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 5/8" (16 mm) 1/8" (3 mm) plastic-dipped glow .60
Journeyman
TM
Series – Dual-material handles
J203-8 8-9/16" (218 mm) 2-5/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 5/8" (16 mm) 1/8" (3 mm) Journeyman yellow/black .63
Wire Stripping – Cleanly strips 12 AWG wire
D203-8N 8-7/16" (214 mm) 2-5/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 5/8" (16 mm) 1/8" (3 mm) plastic-dipped yellow .59
Journeyman
TM
Series – Dual-material handles
J203-8N 8-9/16" (218 mm) 2-5/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 5/8" (16 mm) 1/8" (3 mm) Journeyman yellow/black .64
Wire Stripping & Crimping – Cleanly strips 12 AWG wire; crimps connectors, lugs & terminals
D203-8NCR 8-7/16" (214 mm) 2-5/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 5/8" (16 mm) 1/8" (3 mm) plastic-dipped yellow .61
Refer to the insulated section for insulated pliers.
Hot-riveted joint
ensures smooth action
and no handle wobble.
Custom,
US-made
tool steel.
Plastic-dipped handles
†
for comfort and
ease of identification.
Slim head design
for working in
confined areas.
†
Journeyman
TM
pliers available. State-of-the-art,
dual-material handles, which provide a better grip without
sacrificing tool strength or durability.
MADE IN USA
J206-8C
J207-8CR
D203-8NCR
D203-8GLW
Glow in the Dark Pliers
NEW!
16 AWG
8-16 AWG
10-18 AWG
12 AWG
All-Purpose Pliers
Additional Features:
•
Cat No. J206-8C strips 8-16 AWG solid and 10-18 AWG stranded wire
and Cat. No. J207-8CR strips 10-18 AWG solid and
12-20 AWG stranded wire.
•
Cat. No. J207-8CR crimps non-insulated
connectors, lugs and terminals.
•
Induction-hardened cutting knives for increased
wire cutting performance, including hard wire.
•
Long nose for grabbing and looping wire.
•
6-32 and 8-32 screw shearing.
•
Dual material Journeyman™
handles provide better grip.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Point Thickness Handle Finish Handle Color Weight (lbs.)
J206-8C 8-5/8" (214 mm) 2-3/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 1/2" (13 mm) 1/8" (3 mm) Journeyman yellow/black .60
J207-8CR 8-5/8" (214 mm) 2-3/16" (59 mm) 1" (25 mm) 1/2" (13 mm) 1/2" (13 mm) 1/8" (3 mm) Journeyman yellow/black .60
NEW!
10 – 18 AWG
12 – 20 AWG
Long-Nose Pliers
Features:
15
Pliers
15
15