Brochure

BC508C
BC504C
BC505C
BC506C
BC599
Magnetic Tool Storage Module
• Rare-earth magnetic plates hold
hand tools, sockets, bits and
small parts
• Strong enough to hold
lineman’s pliers
• Made with impact resistant nylon to
stand up to tough working conditions
Closed Hook Module
• Easily attaches to the inside
or outside rails of the Wall Assembly
• Helps secure tools to prevent
from falling
• Single hook holds a wide
variety of lineman tools
• Open the latch even with gloves on
• Made with impact resistant nylon to
stand up to tough working
Integrated Corner Piece
• Seamlessly connects to the Wall
Assembly pieces for a continuous
storage system
• 4hooksandaipbarcan
swivel in and out
• Accommodatesdierentsizelineman
tools while making use of dead space
in the corner
• Made with impact resistant nylon to
stand up to tough working conditions
Cat. No. UPC 0-92644+ Description Overall Length Overall Width Overall Height
BC100WA 61037-0 1 Man Wall Assembly 19.27" (48.9 cm) 4.4" (11.2 cm) 15.94" (40.5 cm)
BC150WA 61039-4 1.5 Man Wall Assembly 22.77" (57.8 cm) 4.4" (11.2 cm) 15.94" (40.5 cm)
BC200WA 61040-0 2 Man Wall Assembly 40.27" (102.3 cm) 4.4" (11.2 cm) 15.94" (40.5 cm)
BC501C 61016-5 Hard Tool Storage Module 15.2" (38.6 cm) 4.9" (12.6 cm) 11.5" (29.1 cm)
BC502C 61036-3 Tool Apron Module 15.5" (39.4 cm) 2.2" (5.6 cm) 19.7" (50.0 cm)
BC504C 61029-5 Magnetic Tool Storage Module 3.54" (9.0 cm) 1.58" (4.0 cm) 8.71" (22.1 cm)
BC505C 61030-1 Open Hook Module 3.11" (7.89 cm) 2.45" (6.22 cm) 5.02" (12.7 cm)
BC506C 61031-8 Closed Hook Module 3.11" (7.89 cm) 2.45" (6.22 cm) 5.02" (12.7 cm)
BC507C 61032-5 Auger Bit Storage Module 4.1" (10.4 cm) 2.8" (7.2 cm) 21.1" (53.6 cm)
BC508C 61033-2 Utility Bar Storage Module 10.1" (25.6 cm) 3.9" (9.9 cm) 3.9" (9.9 cm)
BC509C 61034-9 Socket Storage Module 3.5" (8.9 cm) 2.2" (5.6 cm) 15.4" (39.1 cm)
BC599 61041-7 Integrated Corner Piece 8.05" (20.4 cm) 8.05" (20.4 cm) 15.87" (40.3 cm)
PAIR PAIR
S-HOOK & S-HOOK &
RAIL SYSTEM RAIL SYSTEM
MODULES IN MODULES IN
ONE BUCKETONE BUCKET
MIX AND MATCH
BC507C
Auger Bit Storage Module
• 2 slots to store 12", 18", or 24"
long auger bits
• Aluminum Spacer slides into one slot
to store a 12" auger bit in the 18"
holder or store an 18" long auger bit
in the 24" bit holder
• Module will not melt with hot auger
bits, or dull tips of auger bits
• Made with impact resistant nylon to
stand up to tough working conditions
Utility Bar Storage Module
• 10" long bar allows tools to slide
in and out with ease
• Holds lineman tools including
hammers, straps, ropes and long
handled tools
• Made with impact resistant
nylon to stand up to tough
working conditions
Open Hook Module
• Easily attaches to the inside rails of
the Wall Assembly
• Single hook holds a wide variety of
lineman tools
• Made with impact resistant nylon to
stand up to tough working conditions
BC501C
BC502C
BC509C
Socket Storage Module
• 6 slots to store commonly used
impact socket sizes or Klein’s Impact
Socket Set, sold separately
(Cat. No. 66010)
• Fits a range of socket sizes from
3/8" to 1-1/8"
• Magnetic slots to keep sockets
in place during transit
• Sockets are stored from smallest to
largest to quickly identify the right
size needed for the job
• Made with impact resistant nylon to
stand up to tough working conditions
Wall Assembly
• Available in 3 sizes to t
standard utility buckets
• 50 lb load rating for each rail
• Heavy-duty materials made with
UV resistant plastic to stand up to
tough working conditions
• Special design bumpers allow Rail System to stay in place
during transit and articulation of aerial buckets
• Easily attaches to utility buckets with quick release
and adjustable clamps
• Features (4) inside and (1) outside rail for customization
BC150WA
1.5 Man1.5 Man
Wall AssemblyWall Assembly
BC200WA
2 Man2 Man
Wall AssemblyWall Assembly
1 Man1 Man
Wall AssemblyWall Assembly
BC100WA
Hard Tool Storage Module
• 18 compartments hold a wide
variety of lineman tools
• Rare-earth magnets hold
hardware and small tools
• Innovative design intended to be
more durable than traditional tool
aprons
• Rubberapsholdtoolsduring
transit and are also adjustable
and replaceable
• Made with impact resistant nylon to
stand up to tough working conditions
Tool Apron Storage Module
• 12 compartments to accommodate
a wide variety of lineman tools
• Double stitched hammer loop and
knife pouch helps keep tools secure
when not in use
• Rare-earth magnets hold hardware
and small tools
• Innovative design intended to be
more durable than traditional
tool aprons
• Bonus buckle for extra storage