Cut Sheet

273273273
www.kleintools.com
See Wire Pulling Grip Warnings on page 261.
All dimensions are in inches and (millimeters).
Wire Pulling Grips
1604-20
1604-20L
•
Designed for use when light, compact grip is desired
and where cable deformation is not a factor.
•
Gripping pressure of the knurled jaw is applied to 1/4"
(6.35 mm) cable area.
•
Latch on Cat. No. 1604-20L help hold cable in the jaw.
Messenger and Guy Strand –
1604 Series
Cat. No. Latch
Model
Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
2,500 lbs. (1,134 kg) Maximum Safe Load
1604-10 NA .06" - .25" (1.52 mm - 6.35 mm) N/A 1 lb. (.45 kg)
5,000 lbs. (2,268 kg) Maximum Safe Load
1604-20 1604-20L .125" - .50" (3.18 mm - 12.70 mm) N/A 2.08 lbs. (1.14 kg)
1625-20
•
Designed for use when light, compact grip is
desired and where cable deformation is not a factor.
•
Gripping pressure of the knurled jaw is
applied to 1/4" (6.35 mm) cable area.
•
All 1625 series have a swing latch to help
hold cable in the jaw.
Wire Rope – 1625 Series
Steel Strand – Haven’s
TM
Grips
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
8,000 lbs. (3,629 kg) Maximum Safe Load
1625-20 .28" - .75" (7.11 mm - 19.05 mm) N/A 4 lbs. (1.81 kg)
1625-20 7/8 .38" - .88" (9.65 mm - 22.35 mm) N/A 4 lbs. (1.81 kg)
1625-20 1 .50" - 1.00" (12.70 mm - 25.40 mm) N/A 4 lbs. (1.81 kg)