Cut Sheet

270
www.kleintools.com
All dimensions are in inches and (millimeters).
Wire Pulling Grips
See Wire Pulling Grip Warnings on page 261.
1628-30
1628-50
1628-40
•
Round jaws are shaped to provide maximum contact with
the cable, virtually eliminating cable deformation.
1628 Series
1628 Series
*These grips are special order only.
Please allow 30 days for delivery. These are not returnable.
Chicago
TM
Grips
•
Removable bolt on floating
jaw, secured by a slotted nut
and cotter pin. Jaw provides
increased cable coverage.
•
Cat. No. 555 replacement
bolt available.
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
1628-30P* .95" - 1.02" (24.23 mm - 25.78 mm) 10-3/4" (273 mm) 27 lbs. (12.27 kg)
1628-30R* 1.02" - 1.08" (25.81 mm - 27.38 mm) 10-3/4" (273 mm) 27 lbs. (12.27 kg)
1628-30S* 1.08" - 1.14" (27.41 mm - 28.96 mm) 10-3/4" (273 mm) 27 lbs. (12.27 kg)
1628-30T* 1.14" - 1.20" (28.98 mm -30.56 mm) 10-3/4" (273 mm) 27 lbs. (12.27 kg)
1628-30U* 1.21" - 1.26" (30.59 mm - 32.13 mm) 10-3/4" (273 mm) 27 lbs. (12.27 kg)
20,000 lbs. (9,072 kg) Maximum Safe Load
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
1628-40U* 1.20" - 1.26" (30.59 mm - 32.13 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-40W* 1.27" - 1.32" (32.16 mm - 33.73 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-40X* 1.33" - 1.39" (33.76 mm - 35.30 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-40Y* 1.39" - 1.45" (35.33 mm - 36.91 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-40Z* 1.45" - 1.52" (36.93 mm - 38.48 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-40A* 1.52" - 1.58" (38.51 mm - 40.08 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
25,000 lbs. (11,340 kg) Maximum Safe Load
25,000 lbs. (11,340 kg) Maximum Safe Load
Cat. No. Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
1628-50P* .95" - 1.02" (24.23 mm - 25.78 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50R* 1.02" - 1.08" (25.81 mm -27.38 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50S* 1.08" - 1.14" (27.41 mm - 28.96 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50T* 1.14" - 1.20" (28.99 mm - 30.55 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50U* 1.20" - 1.27" (30.58 mm - 32.13 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50W* 1.27" - 1.33" (32.16 mm - 33.73 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50X* 1.33" - 1.39" (33.76 mm - 35.30 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50Y* 1.39" - 1.45" (35.33 mm - 36.91 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50Z* 1.45" - 1.52" (36.93 mm - 38.48 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50A* 1.52" - 1.58" (38.51 mm - 40.08 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50B* 1.58" - 1.64" (40.11 mm - 41.66 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50C* 1.64" - 1.70" (41.68 mm - 43.26 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50D* 1.70" - 1.77" (43.28 mm - 44.83 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50E* 1.77" - 1.83" (44.86 mm - 46.43 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
1628-50F* 1.83" - 1.89" (46.46 mm - 48.00 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
D
E
E
F
25,000 lbs. (11,340 kg) Maximum Safe Load
with bolt on jaw
VR2 is a registered trademark of Southwire Company.
TransPowr and T-2 are registered trademarks of
General Cable Technologies Corporation.
Chicago
®
Grip – Dual Conductor
•
Designed specifically for VR2
®
(vibration-resistant) and
TransPowr
®
T-2
®
dual conductor twisted pair cables.
•
Machined upper and lower jaws eliminate scoring or
damage to second conductor.
Cat. No. Min. to Max. Cable
Dia. in. (mm)
Jaw
Length
Approx.
Wt. Each
1628-40VRU 1.20" - 1.27" (30.58 mm - 32.13 mm) 10-3/4" (273 mm) 34 lbs. (15.45 kg)
Currently available in U size. Made to order.
Please call Klein Tools for expected delivery dates. These are not returnable.
1628-40VRU
Note: Jaw must be removed
to insert cable.