Buying Guide

Punchdown Accessories
•
Blades compatible with Klein® punchdown tools and other bayonet style (twist & lock) socket tools
•
Precision ground cutting-edge for clean, precise wire termination (depending on blade type)
•
Terminate, and adjust cable in variety of cross-connect panels, blocks and keystone jacks
•
Induction-hardened high-carbon steel blades for durability and long life
•
Reversible blades with termination/cutting ends and
termination only ends (depending on blade type)
•
WorkEnds™ Kit converts the Punchdown Multi-Tool
chassis (Cat. No. VDV427-047) into a multi-bit driver
•
Wire Pick (Cat. No. VDV327-103) is a professional
pick/probe/spudger for precise maintenance of
wires on blocks or jacks
VDV427-016
VDV327-103
VDV770-050
†
VDV427-015
VDV200-010
Coaxial Hex-Crimp Die Sets
†WorkEnds™ Kit is only compatible with VDV427-047, VDV427-806 and VDV427-807.
Ratcheting Crimper Frame
•
Professional CATV, electrical, home theater, satellite and security system ratcheting
crimper frame with optional dies is perfect for fast, reliable connector installations
•
Full-cycle ratchet action assures a complete, precise crimp every cycle
•
Preset tension for optimum performance
•
Ratchet mechanism is designed to prevent the release of the connector prior to full compression
•
Safety crimp release helps eliminate rejected terminations due to incorrect positioning
•
Steel body with black-oxide finish for corrosion resistance and durability
•
Thumb-screws secure die-sets for quick, easy changes
•
Optional, quick interchangeable die sets thumb and Phillips screw set available (see table)
Cat. No. Handle Color Overall Length Weight
VDV200-010 Black/Yellow 8-3/4" (222.3 mm) 1.2 lb (0.5 kg)
Cat. No. Die Set Nest Dimension
VDV999-033 Replacement
Screw Set
(Thumb and
Philips)
N/A
VDV212-034 CATV F
Connectors
RG59 RG6
0.255"/
0.320"/ 0.350"
6.48/ 8.13/
8.89 mm
VDV205-035 Insulated
Terminals,
AWG 10-22
AWG 22-18/
16-14/12-10
DIN 0.5-1.0/
1.5-2.5/
4-6 mm²
VDV205-036 Non-Insulated
Terminal or
Open Barrel
Terminal,
AWG 10-20
AWG 20-18/
16, 14/12-10
DIN 0.5-1.5-
2.5/
4-6 mm²
Cat. No. Die Set Nest Dimension
VDV211-037 RG58/RG59/
RG6/RG62
0.256"/ 0.319"/
0.068"/ 0.213"/
6.50/ 8.10/
1.73/5.41 mm
VDV211-038 RG58/RG59/
RG6/RG62
0.256"/0.068"/
0.213"/6.50/
1.73/5.41 mm
VDV205-039 Pin Terminal
Insulated or
Non-Insulated
Ferrules, AWG
12-22
AWG 22/20/18/
16/14/12
DIN 0.5/0.75/
1.0/ 1.5/2.5/
4 mm²
VDV201-040 RG58/RG59/
RG62/RG174
Fiber Optic
0.043"/ 0.068"/
0.100"/ 0.137"/
0.213"/ 0.255"/
1.09/1.73/2.54/
3.48/5.41/
6.48 mm
Cat. No. Die Set Nest Dimension
VDV211-041 RG58/RG59/
RG6/RG62
0.255"/0.213"/
0.098"/0.068"/
0.321" 6.48/
5.41/2.49/
1.73/8.15 mm
VDV201-042 RG174/
RG179/Belden
8218 and
Fiber Optic
0.042"/0.068"/
0.078"/ 0.128"/
0.151"/0.178"/
1.07/7.73/1.98/
3.25/3.84/
4.52 mm
VDV211-043 RG8/RG11/
RG174/
RG179/RG213
0.100"/0.128"/
0.429" 2.54/
3.25/10.90 mm
VDV205-044 Non-Insulated
Terminal,
AWG 8-18
AWG 18-16/14
/12-10/8
DIN 0.75-1.5/
2.54/ 4-6/
10 mm²
Cat. No. Overall Length Color Conguration End 1 Conguration End 2 Weight
VDV327-103 7-1/4" (184.2 mm) Yellow Metal Hook End Non-Conductive Spudger End 0.10 oz (2.8 g)
VDV427-015-SEN 2-3/32" (53.2 mm) Black 110 Terminate 110 Terminate and Cut 0.10 lb (0.05 kg)
VDV427-016-SEN 2-19/64" (58.3 mm) Black 66 Terminate 66 Terminate and Cut 0.6 oz (17 g)
VDV427-104 2-13/64" (56.0 mm) Chrome 110 Terminate and Cut 66 Terminate and Cut 0.61 oz (17.3 g)
VDV770-050 3-13/64" (81.4 mm)
Proprietary Magnetic Hex 1/4" Female Hex 1.4 oz (40 g)
Punchdown Tools & Accessories
NOTE: Use caution when tightening thumb screws to prevent thread damage/stripping and hand tighten only;
do not over-tighten the thumb screws. Over-tightening thumb-screws can damage the tool and/or die set.
Punchdown Tools & Accessories
Crimp Tool and Die Sets
Voice/Data/Video Tools, Testers & Connectors
See page 295 for additional information on warnings.
www.kleintools.com
177