Buying Guide

VDV501-829
VDV770-834
VDV501-828
VDV Commander™
•
VDV Commander™ Series locates, tests and measures
coaxial, data (RJ45) and telephone (RJ11) cables
•
Measure cable length and distance to a fault with Time Domain Reflectometry (TDR) technology
•
Locate and identify cables with location ID remotes,
Test-n-Map™ remotes, Link Light and Tone Generator*
•
Detect, identify and test Power over Ethernet (PoE)
•
Perform active network (Ethernet) testing
•
Save up to 256 cable or network tests and export to print reports
•
VDV Commander has a battery life of 20 hours active and 10 years standby;
Probe battery life is 25 hours active and 4 years standby
•
Cat. No. VDV501-828: 1 Commander™ tester • Test-n-Map™ Remote #1 • 5 LanMap™ ID
Remotes • 5 CoaxMap™ ID remotes • 1 test cable each for USB, RJ12 and RJ45 • 1 coax
adapter • carrying case
•
Cat. No. VDV501-829: 1 Commander™ tester • Test-n-Map™ Remote #1 • 1 PROBEplus Tone
Tracing Probe • 20 LanMap™ ID Remotes • 20 CoaxMap™ ID remotes • 1 test cable each for
USB, RJ12 and RJ45 • 1 coax adapter • carrying case
Cat. No. Overall Length Overall Height Batteries Weight
VDV501-828 1-27/32" (46.9 mm) 6-51/64" (172.6 mm) (6) AA Alkaline Included 12 oz (340 g)
VDV501-829 4-3/8" (111.1 mm) 6-51/64" (172.6 mm) Commander: 6 AA Alkaline
Included; Probe: 1 9V
Alkaline Included
12 oz (341 g)
* Functionality requires an analog tone tracing probe VDV500-060 (Included with Cat. No. VDV501-829).
VDV Commander™ Test-n-Map™ Remote Kit
•
Maximize your VDV Commander™ with single-step Test-n-Map™ Remotes
•
Test, map and identify a location in a single step
•
Cuts testing and identification time in half
•
Test and identify up to eight locations at once
•
Kit includes (7) Test-n-Map™ Remotes, (8) Coax Push-on F Adapter,
(8) RJ45 Jumper Test Cables (9" (228.6 mm)), (2) RJ11/RJ12 Jumper
Cables, (1) Verification Cable
Cat. No. Overall Length Overall Height Overall Width Weight
VDV770-834 13-3/4" (349.3 mm) 8-25/32" (222.9 mm) 2-1/32" (51.4 mm) 1.4 lb (0.6 kg)
Tester sold separately.
Voice/Data/Video Test & Measurement
Features
RJ-45 8-Wire Cables
●
F-connector Coaxial Cables
●
Telephone Cables with adapter
Wiremap
●
Open Fault
●
Short Fault
●
Miswire Fault
●
Split-Pair Fault
●
Pass TIA-568A/B & Crossover/Uplink
●
Active Ethernet
Detects link speed and capabilities to 1 Gbps
●
Single-End Cable Testing
●
Test-n-Map™ Remote (Two End Testing)
Test and Indentify location in one step with remote
supports
up to 8
Po E
Power Over Ethernet Testing
●
TDR
Time Domain Reflectometry
Length Measurement Method
●
Measures Cable Length
1500 ft. /
457 m
±
(5% + 1 Ft.)
±
(5% + 0.3 m)
Accuracy/ Measurement Resolution
●
Link Light
●
ID
Cable Identification
supports
up to 20
S
Shield Detection
●
Voltage Warning
●
Low Battery Indicator
●
Store Test Results 256
Print / Export Custom Reports
●
Multiple-style Tone Generator
*
Down to Single Conductor/Pair/Cable
4
Color LCD Display
2.7
"
Multiple Languages
ENG
·
ESP
·
FRA
Ft./m
Imperial or Metric Results
●
Apo
Auto Power Off
●
Customizable Setup
●
USB interface (for PC connection) MICRO
Upgradeable Firmware
(via internet download & pc connection)
●
See page 295 for additional information on warnings.
www.kleintools.com
183
WARNING: Do NOT use on energized circuits or cabling systems.
Voice/Data/Video Tools, Testers & Connectors