Instructions / Assembly

Add “setup” file from “Reporting Applications 2.51”
From http://www.updatetesters.com/ here
Add Cable Tester Version E (select latest revision) from
http://www.updatetesters.com/ here
Add Cable Tester Version L (select latest revision) from
http://www.updatetesters.com/ here
Add Cable Tester Version C (select latest revision) from
http://www.updatetesters.com/ here
If an error occurs during the download process, follow
the steps below:
1. Close the Cable Tester application.
2. Reset the Cable Tester by removing a battery and reinserting it. Note: the VDV Commander screen may
remain dark, which means it is in Firmware update mode.
3. Restart the application. It will display “Cable Tester Attached” at the bottom left of the screen.
4. Follow the Cable Tester Firmware Update instructions above.