Product Brochure

VOICE/DATA/VIDEO TOOLS
33
Hole Saws
Carbide Grit Hole Saws
•
Available in the most common sizes for recessed can lights.
•
Carbide grit for smooth cuts and minimal tear out.
•
Long-lasting carbide grit won’t dull in abrasive materials.
•
Grit design reduces the kick when starting a cut in plywood.
•
Cuts through drywall, ceiling tile, lathe/plaster, cement board,
and wood.
Cat. No. Saw Diameter For Use with Arbor No. Weight (lbs.)
31605 6-3/8" (161 mm) 31168, 31665, 31670 1.65
31607 6-5/8" (168 mm) 31168, 31665, 31670 1.65
31611 6-7/8" (174 mm) 31168, 31665, 31670 1.75
31605
Note: Set pilot drill point 1/8" beyond tooth points.
Note: Read and follow safety instructions in power tool owner’s manual.
Quick Cutter
®
Adjustable Hole Saw
•
Hole saw blades adjust to cut holes from
2 -1/2" to 7" in diameter.
•
Carbide coated blades for longer blade life.
•
Cuts holes in drywall and ceiling tile.
•
Dust shield included.
Cat. No. Range Weight (lbs.)
53731 2-1/2" - 7" (64 mm - 177 mm) 1.00
Quick Cutter
®
is a registered trademark of Speare Tools.
53731
NOTE: Read and follow safety instructions in power tool owner's manual.
Ship-Auger Bits
Ship-Auger Bits with Screw Point
•
Bits drill through nails, wood, vinyl, plastics, and heavy timber.
•
Special bit steel with machine-ground flutes and polished
edges for smooth, wobble-free boring.
•
Feed-screw pilot draws bit into wood.
•
Full length is heat-treated and tempered.
•
Deep, open-throat design clears chips for faster, cleaner cuts.
53429
Cat. No. Bit Size Twist Length Overall Length Weight (lbs.)
53401 11/16" 4" (102 mm) 6" (152 mm) .30
53402 3/4" 4" (102 mm) 6" (152 mm) .40
53403 13/16" 4" (102 mm) 6" (152 mm) .40
53404 7/8" 4" (102 mm) 6" (152 mm) .50
53405 15/16" 4" (102 mm) 6" (152 mm) .50
53406 1" 4" (102 mm) 6" (152 mm) .50
53407 1-1/16" 4" (102 mm) 6" (152 mm) .60
53408 1-1/8" 4" (102 mm) 6" (152 mm) .80
53409 1-1/4" 4" (102 mm) 6" (152 mm) 1.00
53410 1-3/8" 4" (102 mm) 6" (152 mm) .80
53411 1-1/2" 4" (102 mm) 6" (152 mm) .90
53426 3/4" 4-3/4" (121 mm) 7-3/4" (197 mm) .45
53428 7/8" 4-3/4" (121 mm) 7-3/4" (197 mm) .60
53429 1" 4-3/4" (121 mm) 7-3/4" (197 mm) .60
53430 1-1/8" 4-3/4" (121 mm) 7-3/4" (197 mm) .80
Cat. No. Bit Size Twist Length Overall Length Weight (lbs.)
53431 1-1/4" 4-3/4" (121 mm) 7-3/4" (197 mm) .90
53434 9/16" 15" (381 mm) 18" (457 mm) .65
53435 5/8" 15" (381 mm) 18" (457 mm) .80
53436 11/16" 15" (381 mm) 18" (457 mm) .85
53437 3/4" 15" (381 mm) 18" (457 mm) .95
53438 13/16" 15" (381 mm) 18" (457 mm) 1.05
53439 7/8" 15" (381 mm) 18" (457 mm) 1.20
53440 15/16" 15" (381 mm) 18" (457 mm) 1.50
53441 1" 15" (381 mm) 18" (457 mm) 1.70
53442 1-1/16" 15" (381 mm) 18" (457 mm) 1.95
53443 1-1/8" 15" (381 mm) 18" (457 mm) 1.80
53444 1-1/4" 15" (381 mm) 18" (457 mm) 2.20
53445 1-3/8" 15" (381 mm) 18" (457 mm) 2.80
53446 1-1/2" 15" (381 mm) 18" (457 mm) 3.45
•
Shanks are 7/16" hex to fit 1/2" and larger three-jaw chucks.
•
Head and twist are ground to correct clearance for easy
removal from hole.
•
For heavy construction and repair work in mines, on docks
and bridges, and for electrical work.
WARNING: Always ensure that you and persons in the vicinity
wear approved eye protection.
WARNING: Never use on or near live electrical circuits.
All dimensions are in inches and (millimeters) unless otherwise specified.