Product Brochure

VOICE/DATA/VIDEO TOOLS
31
Flexible Drill Bits
Flex Bit Augers
•
Used to drill holes through wood within a wall.
•
Tapered back for easy bit retrieval.
•
Spring steel shaft resists deformation.
•
Screw point tip pulls the bit through wood.
•
Hole in tip allows for use with wire or cable pulling grip.
Cat. No. Length Weight (lbs.)
53716 3/8" x 54" (9.5 mm x 1372 mm) 1.00
53717 3/8" x 72" (9.5 mm x 1829 mm) 1.00
53718
9/16" x 54" (14 mm x 1372 mm) 1.00
53719
3/4" x 54" (19 mm x 1372 mm) 2.00
53751
3/4" x 72" (19 mm x 1829 mm) 2.00
53720
1" x 54" (25 mm x 1829 mm) 2.00
53719
53720
53719
53716
53718
WARNING: Always wear approved eye protection.
WARNING: Never use on or near live electrical circuits.
All dimensions are in inches and (millimeters) unless otherwise specified.
NOTE: Read and follow safety instructions in power tool owner's manual.
Flex Bit Extensions
•
Connects to the end of a flex bit and extends the length.
•
For use with flex bits 3/4" and larger (Cat. No. 53722).
•
Connection diameter is 5/8" (Cat. No. 53722).
•
For use with flex bits 9/16" and smaller (Cat. No. 53723).
•
Connection diameter is 7/16" (Cat. No. 53723).
53722
Cat. No. Length Connection Diameter Weight (lbs.)
53722 54" (1372 mm) 5/8" (14 mm) 1.00
53723 54" (1372 mm) 7/16" (11 mm) 1.00
Pulling Grips
Pulling Grips
•
Clips to flex bit for pulling wire and cable.
•
Grip (Cat. No. KPS050) is used to pull up to 9/16"
diameter wire, cable or fish tape through walls; grip (Cat. No. KPS075) up to 1".
•
Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull.
•
Swivel end helps reduce twisting.
Cat. No. Capacity Maximum Safe Load Weight (lbs.)
KPS050 1/2" - 9/16" (12 mm - 14 mm) 100 lb 1.00
KPS075 3/4" - 1" (19 mm - 25 mm) 185 lb 1.00
WARNING: Do not exceed maximum safe load as listed on the
label attached to the product.
WARNING: Always match proper size and type of grip to application.
WARNING: Always inspect equipment before use.
KPS075
Cat. No. Kit Contains Weight (lbs.)
53721
2.00
Cat. No. Description
53715 flex bit placement tool
53718 flex drill bit - 9/16" x 54" (14 mm x 1372 mm)
KPS050 pulling grip - 1/2"–9/16" (12 mm - 14 mm)
Flex Bit Kit
Flex Bit Kit
•
3 piece kit includes folding placement tool, 1/2"-9/16" O.D. pulling grip
and 9/16" x 54" flexible drill bit.
•
Everything you need to pull up to 9/16" O.D. wire.
•
Complete kit used for drilling and pulling wire and cable.
•
Use placement tool (Cat. No. 53715) to guide bit through walls.
•
Flexible drill bit (Cat. No. 53718) makes 9/16" holes in wood.
•
Pulling grip (Cat. No. KPS050) attaches to the flexible drill bit
after the hole has been made and pulls 1/2" – 9/16" wire and cable.
53721