Buying Guide

Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Point Thickness Handle Finish Handle Color Weight
J206-8C 8-5/8" (219.1 mm) 2-3/16" (55.6 mm) 1" (25.4 mm) 1/2" (12.7 mm) 1/2" (12.7 mm) 1/8" (3.2 mm) Journeyman Yellow/Black 9.6 oz. (272 g)
J207-8CR 8-5/8" (219.1 mm) 2-3/16" (55.6 mm) 1" (25.4 mm) 1/2" (12.7 mm) 1/2" (12.7 mm) 1/8" (3.2 mm) Journeyman Yellow/Black 9.6 oz. (272 g)
J207-8CR
8 – 16 AWG
10 – 18 AWG
10 – 18 AWG
12 – 20 AWG
J203-8
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Point Thickness Handle Finish Handle Color Weight
J203-8 8-9/16" (217.5 mm) 2-5/16" (58.7 mm) 1" (25.4 mm) 1/2" (12.7 mm) 5/8" (15.9 mm) 1/8" (3.2 mm) Journeyman Yellow/Black 10.1 oz. (286 g)
Wire Stripping – Cleanly strips 12 AWG wire
J203-8N 8-9/16" (217.5 mm) 2-5/16" (58.7 mm) 1" (25.4 mm) 1/2" (12.7 mm) 5/8" (15.9 mm) 1/8" (3.2 mm) Journeyman Yellow/Black 10.2 oz. (289 g)
J206-8C
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Cutting Knives Handle Finish Handle Color Weight
J228-8 8-1/8" (206.4 mm) 13/16" (20.6 mm) 1-3/16" (30.2 mm) 7/16" (11.1 mm) Standard Journeyman Red/Black 10.7 oz. (303 g)
J248-8 8-1/8" (206.4 mm) 13/16" (20.6 mm) 1-3/16" (30.2 mm) 7/16" (11.1 mm) Standard Journeyman Red/Black 9.8 oz. (278 g)
2000 Series* – Heavy-duty cutting knives
J2000-28 8-1/8" (206.4 mm) 13/16" (20.6 mm) 1-3/16" (30.2 mm) 7/16" (11.1 mm) Standard Journeyman Light Blue/Black 10.7 oz. (303 g)
J2000-48 8-1/8" (206.4 mm) 13/16" (20.6 mm) 1-3/16" (30.2 mm) 7/16" (11.1 mm) Standard Journeyman Light Blue/Black 9.8 oz. (278 g)
J2000-28
Angled Head Profile
High-Leverage Diagonal-Cutting Pliers
Additional Features:
•
High-leverage design. Rivet is closer to the cutting edge for 36%
greater cutting and gripping power than other plier designs
•
Short jaws and beveled cutting edges permit close cutting of wire
•
Cat. Nos. J248-8 and J2000-48 have an angled head design for
easy work in confined spaces
All-Purpose Pliers
Additional Features:
•
Cat. No. J206-8C strips 8-16 AWG solid and 10-18 AWG stranded wire
•
Cat. No. J207-8CR strips 10-18 AWG solid and 12-20 AWG stranded
wire and crimps non-inslated connectors, lugs and terminals
•
Long nose for grabbing and looping wire
•
6-32 and 8-32 screw shearing
Heavy-Duty Long-Nose Pliers - Side-Cutting
Additional Features:
•
Heavier design for greater cutting power
•
Slim head design for working in confined areas
Diagonal-Cutting Pliers
Long-Nose Pliers
Series
See page 310 for additional information on warnings.
www.kleintools.com
25