Instruction Manual

6
ENGLISH
CLEANING
Be sure meter is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents. Take care
to keep the sensor lens clean at all times. If required, loose
debris may be removed from lens using clean compressed air.
Lens may also be cleaned using a soft cloth or cotton swab
with water or rubbing alcohol only . Lens must be allowed to
completely dry prior to use.
STORAGE
Remove the battery when meter is not in use for a prolonged
period of time. Do not expose to high temperatures or
humidity. After a period of storage in extreme conditions
exceeding the limits mentioned in the General Specifications
section, allow the meter to return to normal operating
conditions before using.
FCC & IC COMPLIANCE
See this product’s page at www.kleintools.com for FCC
compliance information
Canada ICES-003 (B) / NMB-003 (B)
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov/recycle for additional
information.
MAINTENANCE
BATTERY REPLACEMENT
When indicator is displayed on LCD, battery must be replaced.
1. Loosen the screw in the Battery Compartment Door
3
to open.
2. Remove exhausted 9V battery and dispose of appropriately.
3. Replace 9V battery and return Battery Compartment Door
3
and tighten screw to secure, taking care not to over-tighten.
MANUAL DE INSTRUCCIONES
Termómetro infrarrojo
• LÁSER DE ENFOQUE
DELOBJETIVO
• RELACIÓN
DISTANCIA
A OBJETIVO
DE 10:1
• PANTALLA
RETROILUMINADA
• FUNCIÓN DE
APAGADO
AUTOMÁTICO
2m
IR1
-4 ° a
752°F
-20° a
400°C
ESPAÑOL
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
[e-mail] www.kleintools.com