MSDS

SHENZHEN KAYO BATTERY CO., LTD.
深 圳 市 嘉 洋 电 池 有 限 公 司
MSDS of KAYO Li-ion Battery Page 6 of 6
(b) For a lithium metal or lithium alloy battery the aggregate lithium content is not more than 2 g, and for a
lithium-ion battery, the aggregate lithium-equivalent content is not more than 8 g;
(c) Each cell or battery is of the type proved to meet the requirements of each test in the Manual of Tests and Criteria,
Part III, sub-section 38.3;
(d) Cells and batteries are separated so as to prevent short circuits and are packed in strong packaging, except when
installed in equipment; and
(e) Except when installed in equipment, each package containing more than 24 lithium cells or 12 lithium batteries
shall in addition meet the following requirements:
(i) Each package shall be marked indicating that it contains lithium batteries and that special procedures should be
followed in the event that the package is damaged;
(ii) Each shipment shall be accompanied with a document indicating that packages contain lithium batteries and
that special procedures should be followed in the event a package is damaged;
(iii) Each package is capable of withstanding a 1.2 m drop test in any orientation without damage to cells or
batteries contained therein, without shifting of the contents so as to allow battery to battery (or cell to cell) contact and
without release of contents; and
(iv) Except in the case of lithium batteries packed with equipment, packages may not exceed 30 kg gross mass.
As used above and elsewhere in these Regulations, “lithium content” means the mass of lithium in the anode of a
lithium metal or lithium alloy cell, except in the case of a lithium-ion cell the “lithium-equivalent content” in grams is
calculated to be 0.3 times the rated capacity in ampere-hours.
16 - Other Information / Disclaimer
This information has been compiled from sources considered to be dependable and is, to the best of our knowledge and
belief, accurate and reliable as of the date compiled. However, no representation, warranty (either expressed or implied) or
guarantee is made to the accuracy, reliability or completeness of the information contained herein.
This information relates to the specific materials designated and may not be valid for such material used in combination with
any other materials or in any process. It is the user's responsibility to satisfy himself as to the suitability and completeness of
this information for his particular use.
KAYO does not accept liability for any loss or damage that may occur, whether direct, indirect, incidental or consequential,
from the use of this information. KAYO does not offer warranty against patent infringement. Additional information is
available by calling the telephone number above designated purpose.
For Shenzhen KAYO Battery Co., Ltd.
Hui Chang
April 24th 2008