Instructions / Assembly

Designed by Electricians for Electricians
Designed by Electricians for Electricians
18
• Non-Contact Voltage Tester
•
•
Non-contact detection of voltage in cables, cords, circuit breakers,
lighting fixtures, switches, outlets, and wires.
•
•
High intensity, bright green LED indicates the tester is
operational and aids in illuminating the workspace.
•
•
When voltage is detected, a high intensity, bright red
LED illuminates and a warning tone sounds.
•
•
Discrete digitally controlled ON/OFF power button.
•
•
Auto power-off feature conserves and extends battery life.
•
•
Microprocessor controlled low-battery indicator and tester shutdown.
•
•
CAT IV 1000 Volt rating provides expanded operation and protection.
•
•
50 to 1000 Volt AC power operating range allows broad application.
•
•
Durable polycarbonate plastic resin construction.
•
•
Lightweight compact design with a convenient clip
to fit securely in your pocket.
•
•
Package contains insert card with integrated
owner's manual and 2 AAA 1.5 volt batteries.
ELECTRICAL TESTERS
Standards:
UL 61010-1 2nd edition
CAN/CSA C22.2 No. 610101-04
EN 61010-1 2nd edition
IEC 61010-1:2001 2nd edition
ISA-82.02.01 (IEC 61010-1 MOD)
Patents:
US D583,266 S
US 7,208,932 B1
WARNINGS:
• It is important that users of this tester read, understand, and follow all warnings,
cautions, safety information, and instructions in the manual before operating or
servicing this tester. Failure to follow instructions could result in death or serious
injury.
• Risk of electric shock and burn. Contact with live circuits could result in death or
serious injury.
• Use caution with voltages above 30V AC as a shock hazard may exist.
• A steady red glow and continuous beep indicates voltage present. If no
indication, voltage could still be present.
• In bright light conditions, the LED visual indicators will be less visible.
• Do not use if green LED is not illuminated.
WARNINGS:
• Do not use if tester appears damaged or if the tester is not operating properly.
If in doubt, replace the tester.
• Do not apply more than the rated voltage as marked on the tester
(1000 volts AC).
• Always wear approved eye protection.
• Before each use, verify operation by testing a known working circuit that is
within the rating of this tester.
• Do not rely on this tester with shielded wire. Operation may be affected by
differences in socket design and insulation thickness and type.
• Comply with local and national safety requirements.
• If this tester is used in a manner not specified by the manufacturer, protection
provided by the tester may be affected.
CAUTION: Do not attempt to repair this tester. It contains no serviceable parts. Do not expose the product to extremes in temperature or high humidity.
•
Non-contact detection of voltage in cables, cords, circuit
breakers, lighting fixtures, switches, outlets, and wires.
•
When voltage is detected, a high intensity, bright
red LED illuminates and a warning tone sounds.
•
Discrete digitally controlled ON/OFF power button.
•
Auto power-off feature conserves and extends battery life.
•
Microprocessor controlled low-battery indicator and tester shutdown.
•
50 to 1000 Volt AC power operating range allows broad application.
•
Lightweight compact design with a convenient clip to fit securely
in your pocket.
NCVT-1
Non-Contact Voltage Tester
SPECIFICATION
NCVT-1
Voltage Range
50-1000 Volts AC
Frequency Range
50-500 Hz
CAT Rating
CAT IV 1000V
Listing
E321008 3TMV
Batteries: Two Alkaline 1.5V AAA or IEC LR03 or NEDA 24A
Dimensions: 5.5" H x 0.72" W x 1" D (140 mm H x 18 mm W x 25 mm D)
Weight: 0.8 oz. (23 g), Weight w/Batteries: 1.6 oz. (46 g)
Double
Insulated
Green LED Power-On Indicator