Product Brochure

WORK
@
HEIGHT
TOOLS
Always use choke hitch
formation
Attach tether through tether
hole when available
Always use a load bearing
anchor or attachment point
Tool Tethers
•
Keep your tools close at hand while working at height
•
Allow for easy tool recovery in case of accidental drops
Cat. No. UPC Code
0-92644-
Maximum
Load Capacity
Relaxed
Length
Stretched
Length
TT1 46000-5 10 lbs (4.5 kg) 32" (813 mm) 60" (1.5 m)
TT2 59006-1 15 lbs (4.5 kg) 32" (813 mm) 51" (1.3 m)
WARNINGS:
• Inspect for wear before each use.
• Do not use for human support.
• Never connect over 5 lbs. (2.3 kg) to a person.
• Do not use around moving or rotating equipment.
WARNINGS:
• Tethers extend to anywhere from 3.5' to 5' (1.3 m to 1.5 m).
Rig to avoid contact with objects below.
• Always ensure cinch remains snug while in use.
• Always attach carabiner end to anchor point.
• Do not attach tether back onto itself.
• Do not tie knots in tether.
TT2
In private industry, falling objects accounted for 10% of worker fatalities in 2013.
In 2012, falling objects caused 18% of contractor deaths, a 7% increase from 2011.
OSHA ranks being “struck by objects” as the third leading cause of disabling workplace injuries.
Klein Tools’ growing line of tethers and tools for Work@Height are designed to protect
workers on the job site as well as their tools.
Triple-locking
carabiner for
additional safety
36" (914 mm) Round Bar
•
Forged fit-up bar is pointed on one end
for aligning bolt holes
•
15° angle chisel-end provides greater leverage
Cat. No.
UPC Code
0-92644+
Diameter Length
3246TT 66000-9 7/8" (22 mm) 36" (914 mm)
Tether hole
Provides extra leverage when positioning
steel members and aligning bolt holes
3246TT
TT1