Product Brochure

WARNING:
Never remove screws while fish tape is coiled inside reel.
WARNING: Wear approved eye protection when feeding, pulling or rewind-
ing fish tape.
WARNING: Do NOT use any fish tape on or near live circuits.
Use extreme caution when working near any electrical equipment.
WARNING: Use a safe work position to avoid loss of balance when using
fish tape.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING:
Never remove screws while fish tape is coiled inside reel.
WARNING: Wear approved eye protection when feeding, pulling or rewind-
ing fish tape.
WARNING: Do NOT use any fish tape on or near live circuits.
Use extreme caution when working near any electrical equipment.
WARNING: Use a safe work position to avoid loss of balance when using
fish tape.
All dimensions are in inches and (millimeters) unless otherwise specified.
FISH TAPES, ACCESSORIES & CONDUIT TOOLS
FISH TAPES, ACCESSORIES & CONDUIT TOOLS
10
11
WARNING: Do not use wet product on live circuits. Compound is
electrically conductive before it dries.
Wire and Cable Pulling Lubricant
Premium Synthetic Wax
®
Klein’s Premium Synthetic Wax Pulling Lubricant is temperature stable
and does not liquify and drop off after high temperature exposure.
Compatible with most types of cable, including low density polyethylene.
Superior “clingability” coats wires and conduit evenly.
Exceptional lubricity.
Non-staining, slow-drying, easy clean-up formula.
Cat. No. Container Temperature Use Range Weight (lbs.)
51010 one-quart squeeze bottle 20° F to 122° F (-6° C to 50° C) 2.25
51012 one-gallon pail 20° F to 122° F (-6° C to 50° C) 8.75
51013 five-gallon pail 20° F to 122° F (-6° C to 50° C) 44
56117 one-quart squeeze bottle -
6 pack
20° F to 122° F (-6° C to 50° C) 13.5
51012
51010
51017
51015
CERTIFIED TO CSA
STANDARD C22.2 NO. 249-96
Premium Synthetic Polymer
®
Klein’s Premium Synthetic Polymer Pulling Lubricant is an
easy-to-apply gel formula that clings instantly to the
cable and allows for easy handling and application.
Compatible with most types of cable, including polyethylene
and semi conducting jackets.
Superior “clingability” coats wires and conduit evenly.
Non-staining, slow-drying, easy clean-up formula.
Cat. No. Container Temperature Use Range Weight (lbs.)
51015 one-quart squeeze bottle 20° F to 140° F (-6° C to 60° C) 2.33
51017 one-gallon pail 20° F to 140° F (-6° C to 60° C) 8.75
51018 five-gallon pail 20° F to 140° F (-6° C to 60° C) 44
One-Quart Premium Synthetic Clear Lubricant
Klein's Premium Synthetic Clear Lubricant is designed for use primarily
in finished workspaces (i.e. around painted walls and carpeted floors).
The crystal clear formulation is easy to clean-up and will not stain.
Excellent all purpose lubricant for electrical or datacom applications.
Compatible with most types of cable jackets.
Temperature stable - will not separate out in hot environments
or when exposed to freezing.
Cat. No. Container Temperature Use Range Weight
51028 one-quart
squeeze bottle
20° F to 120° F
(-5° C to 50° C)
2.3
51028
Electrician’s Gloves
Durable construction allows flexibility.
Features slip resistant construction.
Spandex material is breathable and comfortable to wear all day.
Constructed with a reinforced area at the base of the thumb.
Elastic cuff for secure and comfortable fit.
Index fingers are wrapped with slip-resistant material.
Extended cuff for easy on/off.
Cat. No. Size Weight (lbs.)
40072 large .46
40074 extra-large .48
40072
Gloves
WARNING: Always wear approved eye protection.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING: NOT insulated. Plastic-dipped or slip-on plastic handles are
NOT intended for protection against electrical shock.
Conduit Pliers — Locknut and Reaming
Tightens 1/2" (13 mm) and 3/4" (19 mm) EMT
or 1/2" (13 mm) rigid locknuts.
Fits liquid tight fittings and caps.
Reams and smooths both inside and outside of conduit.
Knurled jaws at nose tip pull wire or fish tape.
Machined nose fits snugly into locknut wings.
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Point Thickness Handle Finish Handle Color Weight (lbs.)
D333-8 7-3/4" (197 mm) 1-5/8" (41 mm) 15/16" (24 mm) 1/2" (13 mm) 3/16" (4.8 mm) plastic-dipped yellow .55
D333-8
Tightens
Locknuts
Cuchillas
Couteaux
Tightens
Bodies & Caps
Cuchillas
Couteaux
Conduit Tools
Side-Cutting Pliers – Fish-Tape Pulling
Quickly and easily pulls 1/8" or 1/4" flat-steel fish tape
without damaging the tape.
High leverage design. Rivet is closer to the cutting edge for
46% greater cutting and gripping power than other plier designs.
Streamlined design with sure-gripping,
cross-hatched knurled jaws.
Cat. No.
Nose Type Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Handle Finish
Handle Color Weight (lbs.)
D213-9NETP New England 9-3/8" (238 mm) 1-19/32" (41 mm) 1-1/14" (32 mm) 5/8" (16 mm) 25/32" (20 mm) plastic-dipped dark blue 1.06
Journeyman Series – Dual-material handles
J213-9NETP New England 9-1/2" (241 mm) 1-19/32" (41 mm) 1-1/14" (32 mm) 5/8" (16 mm) 25/32" (20 mm) Journeyman dark blue/black 1.11
2000 Series* – Heavy-duty cutting knives
D2000-9NETP New England 9-3/8" (238 mm) 1-19/32" (41 mm) 1-1/14" (32 mm) 5/8" (16 mm) 25/32" (20 mm) plastic-dipped royal blue 1.09
Journeyman 2000 Series* – Dual-material handles
J2000-9NETP New England 9-1/2" (241 mm) 1-19/32" (41 mm) 1-1/14" (32 mm) 5/8" (16 mm) 25/32" (20 mm) Journeyman light blue/black 1.14
J2000-9NECRTP New England 9-1/2" (241 mm) 1-19/32" (41 mm) 1-1/14" (32 mm) 5/8" (16 mm) 25/32" (20 mm) Journeyman blue/black 1.13
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
J2000-9NECRTP
Fish Tape Puller
Tirador de
cinta pasadora
Extracteur de
ruban de tirage
Conduit-Fitting and Reaming Screwdriver
Hooded-blade design keeps tip from slipping out of screws,
especially when tightening hard-to-reach conduit fittings.
Thicker hood is designed for rugged use.
Reams and smooths 1/2" (13 mm), 3/4" (19 mm), and
1" (25 mm) thin-wall conduit ends to protect wire and
permit correct installation of fittings.
Cat. No. Shank Tip Width Shank Length Overall Length Weight (lbs.)
85191 3/8" (10 mm) 2-1/2" (64 mm) 7-1/2" (191 mm) .55
19353 conduit reamer replacement blade kit .01
85191
Reams both the inside and outside of
the conduit at the same time.
Longer Cushion-Grip handle provides
comfort and more torque for reaming.