User Guide

16
USING THE LINE SPLITTER (FIG. 2)
1. Plug Line Splitter 10x into receptacle.
2. Plug the load (appliance or device) into the line splitter.
3. Measure current by clamping the clamp meter around the Line
Splitter 10x.
4. The current measured by the clamp meter is 10x the actual current
present in the circuit.
ENGLISH
CLEANING
Wipe with a clean, dry lint-free cloth. Do not use abrasive
cleaners or solvents.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
[e-mail]
www.kleintools.com