User Guide
13
GENERAL SPECIFICATIONS
Relative Humidity: < 85% non-condensing
Operating Temperature: 32° to 140°F (0° to 40°C)
Storage Temperature: 14° to 122°F (-10°C to 50°C)
Weight: 1.3 oz. (37 g)
Nominal Power: 0.3W
Certication:
Conforms To UL Std 1436
Certified To CSA Std C22.2 # 160
Drop Protection: 6.6 ft. (2 m)
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
WARNINGS
Read, understand, and follow all warnings and instructions before
operating testers. Failure to follow instructions could result in death
or serious injury. Before each use, verify tester operation by testing
on a known live and correctly wired receptacle. Do not use if the
tester appears damaged in any way. The tester is intended for indoor
use only. Other equipment or devices attached to the circuit being
tested could interfere with the tester; clear the circuit before testing.
This tester only detects common wiring problems. Always consult a
qualified electrician to resolve wiring problems.
RT210
Hot (Black)Neutral (White)
Ground (Green)
INDICATOR FAULT EXPLANATION
Open Ground Ground contact is not connected
Open Neutral Neutral contact is not connected
Open Hot Hot contact is not connected
Hot/Ground Reversed Hot and ground connections are reversed
Hot/Neutral Reversed Hot and neutral connections are reversed
Correct Receptacle is wired correctly
Indicator Illuminated
YELLOWRED
FIG. 1
Indicator Not Illuminated