Instructions / Assembly

MAINTENANCE
CLEANING: Be sure earbuds are turned off and case is unplugged, and wipe with a clean,
dry lint-free cloth.
Do not use abrasive cleaners or solvents.
STORAGE: If the earbuds are to be left unused for an extended period of time, charge
before storing, and recharge periodically during storage, to maintain battery’s charging
capacity.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be
properly disposed of in accordance with local regulations. Please see
www.epa.gov/recycle for additional information.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069 1-800-553-4676
[e-mail] www.kleintools.com
COMPLIANCE
FCC COMPLIANCE
This device complies with part 15 of the FCC RULES. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received,including interference that may
cause undesired operation.
NOTE: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
FCC RF EXPOSURE STATEMENTS:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC RF Exposure Guidelines.
This device must not be co‐located or operated in conjunction with any other antenna
or transmitter.
IC COMPLIANCE
This device contains license-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation of the device.
This device complies with RSS-247 of Industry Canada. Operation is subject to the
condition that this device does not cause harmful interference. This Class B digital
apparatus complies with Canadian ICES-003.
IC RADIATION EXPOSURE STATEMENT:
The equipment complies with SAR limits set forth for an uncontrolled environment and
meets the RSS-102 of the IC RF Exposure Rules. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
OPERATING INSTRUCTIONS
USING MEMORY FOAM TIPS
11
FOR HEARING PROTECTION
WARNING: Inspect before each use. Damage to the memory foam tip can reduce
noise reduction performance.
Select one of the three sets of memory foam tips that best fit your ear canal. Inspect
each tip for dirt and damage before use.
1. With clean hands, roll and compress the memory foam tips along the stem of the
earbud (FIG. B).
2. Reach over your head with free hand to pull your ear up and back and insert the
memory foam tip portion of the earbud as deep as possible (FIG. C).
3. Hold the earbuds and wait 30 to 40 seconds, until the memory foam tips are fully
expanded.
4. Rotate the earbuds if necessary to make sure the earbuds rest firmly and securely
inside the inner ear (FIG. D).
TURNING EARBUDS ON/OFF
ON: Press and hold the earbud's Multifunction Button
7
for 1.5 seconds, or remove
the earbuds from the charging case. The earbud LED
9
will flash blue 3 times and
turn on.
OFF: Press and hold the earbud's Multifunction Button
7
for 3 seconds. The earbud
LED
9
will flash red 3 times and turn off. Alternatively, turn off the earbuds by
placing them into the charging case.
PAIRING
Bluetooth
®
connection activates automatically and is ready to pair when the earbud
is turned on. One of the earbud's LEDs will flash alternating red and blue and the
other will flash blue every 5 seconds when the earbuds are in pairing mode. On your
Bluetooth
®
wireless compatible device, enable Bluetooth
®
and search/scan for devices
that can be paired. Select “AESEB1” when it appears (refer to user manual of your
device). A voice prompt saying "connected" will sound after a successful pairing.
NOTE: The earbuds will automatically attempt to connect to the last paired wireless
device when turned on, but are ready to pair with any compatible device within 2 minutes
of powering on if the last paired device is not detected.
PAIR MANUALLY
Only one earbud can be manually paired at a time. While earbuds are off, press and
hold one of the earbud's Multifunction Button
7
for 5 seconds to pair one earbud.
Once one earbud is paired, turning on the second earbud will automatically pair both
earbuds with device.
DISCONNECT PAIRING
Turn the earbuds off, or disconnect the earbuds from your device settings.
RESET WIRELESS CONNECTION OR PAIRING WITH DIFFERENT DEVICES
Press and hold the earbud's Multifunction Button
7
for 10 seconds while the
earbuds are powered off. The earbuds will power on first and then shut down during
the process. A purple light will flash twice to clear pairing list with a four-tone audible
sound. Repeat the pairing procedure with a different device.
CONTROLS WHILE LISTENING TO MUSIC
Play: Double-press the left or right earbud’s Multifunction Button
7
.
Pause: Double-press the left or right earbud’s Multifunction Button
7
.
Previous Track: Press and hold the left earbud’s Multifunction Button
7
for 1 second.
Next Track: Press and hold the right earbud’s Multifunction Button
7
for 1 second.
Volume Up: Short-press the right earbud’s Multifunction Button
7
.
Volume Down: Short-press the left earbud’s Multifunction Button
7
.
CONTROLS DURING PHONE CALLS
Answer Call: During an incoming call, short-press the left or right earbud’s
Multifunction Button
7
.
End Call: Double-press the left or right earbud’s Multifunction Button
7
.
Reject Call: During an incoming call, Press and hold the left or right earbud’s
Multifunction Button
7
for 1 second.
Cancel Outgoing Call: Short-press the left or right earbud's Multifunction Button
7
to cancel an outgoing call before the call is connected.
End Current Call And Answer New Incoming Call: Short-press the left or right
earbud’s Multifunction Button
7
.
OPERATING INSTRUCTIONS
Switching Between Two Active Calls: Double-press the left or right earbud’s
Multifunction Button
7
.
Volume Up: Short-press the right earbud’s Multifunction Button
7
.
Volume Down: Short-press the left earbud’s Multifunction Button
7
.
OTHER FUNCTIONS
Enter Voice Command Mode: Short-press the left or right earbud’s Multifunction
Button
7
three times.
Exit Voice Command Mode: Short-press the left or right earbud’s Multifunction Button
7
three times.
NOTE: When using only the left or right earbud, once the maximum volume setting
is reached, short pressing the earbud's Multifunction Button will change the volume
to the lowest setting. When using only the right earbud, press and hold the earbud's
Multifunction Button for 1 second to skip to the next track. When using only the left
earbud, press and hold the earbud's Multifunction Button for 1 second to play the
previous track.
ENGLISH
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Klein Tools, Inc. is under license.