Buying Guide

63035SC
63047
Standard and Communication Cable Cutters
•
Lightweight, yet efficient shear-type cable cutters
•
Replaceable hook-jaw blades grab and hold cable
while shear-cutting action makes clean cuts
•
Exceptionally strong fiberglass handles with heavy
vinyl grips for comfort and slip resistance
•
Heavy-duty pins in head serve as blade-stops
•
Jaws are forged tool steel with black-oxide finish for long life
•
Beveled tips assure positive mating, and hinge on a rugged
bolt with a pin-set nut to maintain proper blade tension
•
Makes a clean, even cut for ease in fitting lugs and terminals
•
Cat. No. 63041TH includes rubber sleeves
•
Cat. No. 63047 cuts lead or rubber-covered communications cable
63041TH
Cat. No. Soft Cable Maximum Capacity MCM Cable Maximum Capacity Replacement Blade Overall Length Weight
63041 1-3/8" (34.9 mm) Diameter MCM 500 Copper, 750 Aluminum 63081 25-1/2" (647.7 mm) 5.3 lb (2.4 kg)
63041TH 1-3/8" (34.9 mm) Diameter MCM 500 Copper, 750 Aluminum 63081 25-1/2" (647.7 mm) 5.3 lb (2.4 kg)
63045 1-3/4" (44.5 mm) Diameter 1000 Copper, 1200 Aluminum 63090 32" (812.8 mm) 8.0 lb (3.6 kg)
63047 Up to 2-1/4" (57.2 mm) Diameter 900-Pair Soft Copper and Aluminum 63110 37" (939.8 mm) 8.6 lb (3.9 kg)
Utility Cable and Rope Cutters
•
Forged steel with black-oxide finish for long life
•
Shear-type hook jaws grab and hold cable while
shear-cutting action makes clean cuts
•
Beveled tips for positive mating
•
Hinge bolt with pin-set nut for proper blade tension
•
Cat. No. 63035SC cuts wire up to 9/32" (7 mm) and
Stoffel
®
container seals
•
Cat. No. 63035 is not designed to cut steel or ACSR
63035
Cat. No. Cutting Capacity Handle Color Overall Length Weight
63035 MCM Cable 350 Copper, 350 Aluminum Red 16-1/4" (412.8 mm) 1.7 lb (0.8 kg)
63035SC 9/32" (7.1 mm) Wire Rope and Cables Red 18" (457.2 mm) 2.0 lb (0.9 kg)
Stoffel® is a registered trademark of Stoffel Seals Corporation.
WARNING: Do NOT cut steel or ACSR.
Cable Cutters Cable Cutters
Cable and Bolt Cutters
W
E
A
R
E
Y
E
P
R
O
T
E
C
T
I
O
N
M
See page 295 for additional information on warnings.
www.kleintools.com
33