Buying Guide

3242
Gooseneck Bar
•
Provides extra leverage when positioning steel members and aligning bolt holes
•
Forged fit-up bar is pointed on one end
•
Chisel-end is at a 45° angle to give even greater leverage
Cat. No. Diameter Length Weight
GN3243 7/8" (22.2 mm) 29-1/4" (743.0 mm) 4.0 lbs. (1.81 kg)
Barrel-Type Drift Pins
•
Machined from quality alloy steel
•
Tapers are uniform and blend into body diameter
•
Tough, drop-forged steel will properly end-pein in use
•
Heat-treated for strength
•
Black finish for rust resistance
3261
Cat. No. Maximum
Diameter
Point
Diameter
Overall Length Weight
3260 11/16"
(17.5 mm)
0.313"
(7.9 mm)
7-1/2"
(190.5 mm)
9.6 oz.
(272 g)
3261 13/16"
(20.6 mm)
7/16"
(11.1 mm)
8"
(203.2 mm)
13.6 oz.
(386 g)
3262 15/16"
(23.8 mm)
0.500"
(12.70 mm)
8"
(203.2 mm)
17.6 oz.
(499 g)
3263 1-1/16"
(27.0 mm)
9/16"
(14.3 mm)
8" (203.2 mm) 24.0 oz.
(680 g)
5459SLVR
Cat. No. Belt Connection Belt Width Dimensions Weight
5459SLVR Tunnel Up to 3-1/2"
(88.9 mm)
3" x 6-3/4"
(76.2 mm x 171.5 mm)
3.2 oz.
(91 g)
5459C
WARNING: Lock collar should ONLY be used on Klein 7/8" connecting bars and
must be installed on connecting bar before using holder.
Round Bars
Cat. No. Diameter Length End Weight
3245 3/4" (19.1 mm) 30" (762.0 mm) 15° 3.3 lbs. (1.50 kg)
3246 7/8" (22.2 mm) 36" (914.4 mm) 15° 5.5 lbs. (2.49 kg)
3246TT 7/8" (22.2 mm) 36" (914.4 mm) 15° 5.3 lbs. (2.40 kg)
3247 3/4" (19.1 mm) 24" (609.6 mm) 15° 2.5 lbs. (1.13 kg)
3248 7/8" (22.2 mm) 30" (762.0 mm) 15° 4.3 lbs. (1.95 kg)
3241 3/4" (19.1 mm) 30" (762.0 mm) Straight 3.2 lbs. (1.45 kg)
3245
3246TT
Hex Bars
Cat. No. Diameter Length End Weight
3242 3/4" (19.1 mm) 30" (762.0 mm) 15° 3.5 lbs. (1.59 kg)
3243 7/8" (22.2 mm) 36" (914.4 mm) 15° 6.0 lbs. (2.72 kg)
3244 3/4" (19.1 mm) 24" (609.6 mm) 15° 2.5 lbs. (1.13 kg)
3240 3/4" (19.1 mm) 30" (762.0 mm) Straight 3.8 lbs. (1.72 kg)
NEW!
NEW!
GN3243
Hex and Round Bars
•
Provides extra leverage when positioning steel members and aligning bolt holes
•
Forged fit-up bar is pointed on one end
•
Chisel-end is at a 15° angle to give greater leverage
•
Cat. No. 3246TT features tether hole for working at height
Connecting Bar Holder
with Lock Collar
•
Lock Collar fits Klein
®
7/8" (22 mm)
connecting Bars (Cat. Nos. 3246,
3246TT, and 3248)
•
Leather steel construction
•
Tunnel loop allows for weight
distribution on belt
•
Fits belts up to 3-1/2" (89 mm) wide
•
Replacement lock collar (Cat. No.
5459C) included; also available
separately
Construction Bars
See page 310 for additional information on warnings.
www.kleintools.com
299
Steel & Concrete Construction Tools
WARNING: Always wear approved personal protective equipment.