Product Brochure

7
HEAVY INDUSTRYHEAVY INDUSTRY
See our entire line at
www.kleintools.com
Messenger and Guy Strand
Haven’s
®
Grips – 1604 Series
Cat. No. Latch Model Min to Max. Cable Diameter Max. Safe Load Weight
1604-10 N/A .06" - .25" (1.52 mm - 6.35 mm) 2,500 lbs. (1,134 kg) 1 lb. (0.45 kg)
1604-20 1604-20L .125" - .50" (3.18 mm - 12.70 mm) 5,000 lbs. (2,268 kg)
2.08 lbs. (1.14 kg)
•
Designed for use when light, compact grip is desired
and where cable deformation is not a factor.
•
Gripping pressure of the knurled jaw
is applied to 1/4" (6.35 mm) cable area.
1604-20
1604-20L
1625-20
•
Designed for use when light, compact grip is desired
and where cable deformation is not a factor.
•
Gripping pressure of the knurled jaw is applied to
1/4" (6.35 mm) cable area.
•
All 1625 series have a swing latch to help hold cable
in the jaw.
Wire Rope Haven’s
®
Grips – 1625 Series
Cat. No. Min. to Max. Cable Diameter Max. Safe load Weight
1625-20 .28" - .75" (7.11 mm - 19.05 mm) 8,000 lbs. (3,629 kg) 4 lbs. (1.81 kg)
1625-20 7/8 .38" - .88" (9.65 mm - 22.35 mm) 8,000 lbs. (3,629 kg) 4 lbs. (1.81 kg)
1625-20 1 .50" - 1.00" (12.70 mm - 25.40 mm) 8,000 lbs. (3,629 kg) 4 lbs. (1.81 kg)
WARNINGS:
• Grips are to be used for temporary installation, not for
permanent anchorage.
• When used on or near energized lines, ground, insulate
or isolate grip before pulling.
• Do not exceed rated capacity.
• Always match proper size and type of grip to application.
• Brfore each use, clean jaw area and inspect grip for
proper operation to avoid slippage.