Product Brochure

3
HEAVY INDUSTRYHEAVY INDUSTRY
See our entire line at
www.kleintools.com
Adjustable-Head Construction Wrench
Cat. No. Max. Size Capacity Length Weight
3239 1-1/2" (38 mm) 16" (406 mm) 2.36 lbs. (1.07 kg)
3227 1-5/16" (33 mm) 11" (279 mm) 1.19 lbs. (0.54 kg)
3239
Ironworker’s Pliers
Broad Head Bull Pins
Cat. No. Overall Length Jaw Length Jaw Width Knife Length Weight
D2000-7CST 9-1/4" (235 mm) 1-9/32" (33 mm) 1-5/32" (29 mm) 5/8" (16 mm) 0.70 lbs. (0.32 kg)
D2000-9ST 9-3/8" (238 mm) 1-19/32" (41 mm) 1-1/4" (32 mm) 25/32" (20 mm) 1.10 lbs. (0.50 kg)
D2000-7CST
3255
Cat. No. Top Diameter Point Diameter Length Weight
3255 1-1/4" (32 mm) 5/16" (8 mm) 13-3/4" (349 mm) 2.90 lbs. (1.32 kg)
3256 1-1/16" (27 mm) 1/4" (6 mm) 10" (254 mm) 1.60 lbs. (0.73 kg)
Note: OSHA 1926.301 (c) specifically states: “Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads.”
•
Forged, heat-treated bull pin increases efficiency
and safety by providing a larger striking surface.
•
Angled head and smooth blending of radii increase
strength and reduce the danger of chipping.
•
Below the head, squared-off shoulders have been
forged to provide a surface for applying wrench
to loosen wedged bull pins.
•
Long, even taper reduces binding and hang-up.
•
Added resistance to “mushrooming” permitting
much longer use than is possible with
conventional designs.
•
Heat-treated for strength, black finish
for rust resistance.
•
Eliminates the need to carry several fixed-size wrenches.
•
Forged from select alloy steel with continuous-taper handle.
•
Industrial black finish for corrosion resistance.
•
Handy lanyard hole (Cat. No. 3227).
•
Twists and cuts soft annealed rebar tie wire.
•
Hook bend handle.
•
Spring-loaded action for self-opening.
•
Heavy-duty knurled jaws.
3227