MSDS

Product Name: Klein Wire Pulling Foam Lubricant Revision Date: June 25, 2015
Page 3 of 5
8. Exposure Controls / Personal Protection
8.1 Control parameters
Exposure limits and recommendations:
Chemical Component
OSHA PEL
ACGIH TLV
Propane
1000 ppm
1000 ppm
Isobutane
Not Determined
1000 ppm
8.2 Exposure controls
Respiratory protection:
Normal ventilation is adequate.
Protective gloves:
For repeated or prolonged skin contact, the use of impermeable gloves is recommended to prevent drying
and possible irritation.
Eye protection:
Safety glasses recommended.
9. Physical and Chemical
9.1 Information of basic physical and chemical properties
Appearance:
Slightly thickened, white foam.
Odor threshold:
Not available
pH:
Lubricant 7.5 to 9.0
Freezing point:
Not available
Boiling point:
Lubricant ∼ 212°F (100°C)
Flash point:
- 100°F (74°C) estimated for propellant mixture
Evaporation rate:
Not available
Flammability (solid, gas):
Not available
Upper/lower flammability or
explosive limits:
Not available
Vapor pressure:
Not available
Vapor density (Air = 1):
>1
Specific gravity (H
2
O = 1):
Lubricant 1.0
Solubility in water:
Dilutes
Partition coefficient: n-
octanol/water:
Not available
Auto-ignition temperature:
Not available
Decomposition temperature:
Not available
9.2 Other Information
10. Stability and Reactivity
10.1 Reactivity:
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability:
Stable
10.3 Possibility of hazardous reactions:
None known.
10.4 Conditions to avoid: