MSDS

Product Name: Klein Wire Pulling Foam Lubricant Revision Date: June 25, 2015
Page 2 of 5
Isobutane
75-28-5
200-857-2
< 8
Flam Gas 1 H220
This product contains no other reportable hazardous components under OSHA 29 CFR 1910.1200 and European
Regulation (EC) No 1272/2008.
4. First Aid Measures
4.1 Description of first aid measures
Eye Contact:
Flush eyes with a large quantity of water for 15 minutes. If irritation continues,
seek medical attention.
Skin Contact:
If skin becomes irritated, wash area thoroughly with soap and water. If irritation
continues, seek medical attention.
Inhalation (Breathing):
If irritation of nose or throat develops, move to fresh air and ventilate area.
Ingestion (Swallowing):
Do not induce vomiting or give anything by mouth. Seek medical attention.
4.2 Most important symptoms and effects, both acute and delayed
Aside from information above, no additional symptoms and effects are anticipated.
4.3 Indication of immediate medical attention and special treatment needed.
No information available.
5. Firefighting Measures
5.1 Extinguishing media:
Carbon Dioxide, Dry Chemical, Foam or Water.
5.2 Special hazards arising from the substance or mixture
Hazardous decomposition and by-products:
High temperature steam, potentially carbon monoxide and carbon dioxide.
5.3 Advice for firefighters
Sealed container can build up pressure when exposed to high heat. Cool containers with water.
6. Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures:
Lubricant is extremely slippery. It should be washed, swept, or squeegeed from floor using wet mops.
6.2 Environmental precautions:
Outside, spills should be covered with sand, dirt, gravel or calcium chloride.
6.3 Methods materials for containment and cleaning up:
Oxidizing agents, such as household bleach, can be used to eliminate the slippery character.
6.4 Reference to other sections:
Refer to Sections 4, 5, 8, and 13 for more information.
7. Handling and Storage
7.1 Precautions for safe handling
Avoid spills and clean them up immediately when they occur. Product is very slippery. For industrial or
professional use only.
7.2 Conditions for safe storage, including incompatibilities
Do not expose container to direct sunlight or temperatures above 120°F. Do not transport or store near heat
sources. Keep cans dry and away from sources of ignition. Keep product containers closed when not in use.
7.3 Specific end uses
See technical data sheet on this product for further information.