MSDS

Premium Synthetic Wax Wire and Cable Pulling Lubricant MSDS, page 2
5. FIRE-FIGHTING MEASURES
Flash Point:
None
Flammable Limits:
Product is not flammable.
Autoignition Temperature:
Does not apply.
Hazardous Decomposition and
By-Products:
High temperature steam, potentially carbon monoxide and carbon
dioxide.
Extinguishing Media:
Does not apply.
Special Precautions:
Does not apply.
Unusual Hazards:
Sealed container can build up pressure when exposed to high heat.
Cool containers with water.
6. ACCIDENTAL RELEASE MEASURES
Lubricant is extremely slippery. It should be washed, swept, or squeegeed from floor using wet mops. Oxidizing
agents, such as household bleach, can be used to eliminate the slippery character. Outside, spills should be
covered with sand, dirt, gravel or calcium chloride.
7. HANDLING AND STORAGE
Keep product containers closed when not in use. Avoid spills and clean them up immediately when they occur.
Product is very slippery.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory Protection:
Normal ventilation is adequate.
Protective Gloves:
For repeated or prolonged skin contact, the use of impermeable gloves
is recommended to prevent drying and possible irritation.
Eye Protection:
Safety glasses recommended.
Exposure Limits and
Recommendations:
Not applicable.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Light yellow, viscous gel with no odor.
Odor Threshold:
Not Available
Vapor Density (Air = 1):
0.9 – 1.1
Specific Gravity (H
2
O = 1):
1.01
Solubility in Water:
Complete
Boiling Point:
∼ 212°F (100°C)
Freezing Point:
∼ 32°F (0°C)