MSDS

MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF SUBSTANCE AND PREPARATION
Product Name:
Premium Synthetic Wax
Wire and Cable Pulling Lubricant
Part Numbers 51010, 51012, 51013
Supplier/Manufacturer:
Klein Tools, Inc.
450 Bond Street
Lincolnshire, IL 60069 USA
Phone: [phone]
Fax: [phone]
Emergency Number: [phone]
Chemical Description: Water Emulsion of Polymers
Product Use: Cable and Duct Lubrication
2 . COMPOSITION / INFORMATION ON INGREDIENTS
This product contains no reportable hazardous components under 29 CFR 1910.1200. There are no OSHA or
ACGIH threshold limit values for the product or any of its ingredients. This product contains no reportable
hazardous components under European Directives 91/55/EEC. All components are listed on the TSCA inventory.
3. HAZARDS IDENTIFICATION
Emergency Overview:
Lubricant is electrically conductive when applied. Dry from conductor
before energizing circuit.
Eye Contact:
Direct eye contact may cause eye irritation. This irritation is minimal
and expected to be transient.
Skin Contact:
This product has low skin irritation potential. There is no dermal
toxicity hazard.
Irritation and Sensitization Potential:
This product has low skin irritation potential. It is not a sensitizer.
Inhalation (Breathing):
No inhalation hazard expected with water vapor.
Ingestion (Swallowing):
Very low ingestion hazard.
4. FIRST AID MEASURES
Eye Contact:
Flush eyes with a large quantity of water for 15 minutes. If irritation
continues, seek medical attention.
Skin Contact:
If skin becomes irritated, wash area thoroughly with soap and water. If
irritation continues, seek medical attention.
Inhalation (Breathing):
No first aid expected to be required. Not an inhalation hazard.
Ingestion (Swallowing):
No first aid expected to be required. If difficulties arise, contact a
physician.