User Guide

Page 6 Active Studio Monitor O 110
electronics. In Figure 5, the arrow points to the
spot on the input circuit board where the jumper
is located, next to the XLR input jack.
1.8 Care of the Cabinet
The cabinet housing of the K+H O 110 active
studio monitor comes standard with a charcoal -
grey (RAL color 7021) or white (RAL color 9010)
colored enamel finish. Handle the cabinet with care
to avoid damaging the finish. To clean the cabinet,
use a soft cloth with a mild cleaning agent only.
Under no circumstances should you use chemical
agents or any cleaners with abrasive action.
2. Diagrams
The outstanding acoustic impression made by the
O 110 is confirmed by measurements using today’s
most critical test methods. The test plots shown here
and on the next several pages are but a small
sampling of these measurements.
Figure 5: Jumper for Overload Protection Circuit
Figure 6: Horizontal Directivity
Figure 7: Vertical Directivity
Using the new material LRIM (Low Resonance Inte-
gral Molding) allowed us to seamlessly integrate a
waveguide into the baffle that is ideal for optimal
dispersion. So an elliptical horn for the tweeter was
added. Thus came to be the dispersion pattern we
mentioned earlier which is narrower vertically and
broader horizontally, as is clearly evident in the test
plots presented in Figures 6 and 7.