User's Guide

Wandfu
- 4 -
In power on state, press vol“-” and PTT button for 10 seconds until the red lamp on.
Upgrade Mode
When connected with computer USB port, press vol “+” and switch button for 3 seconds until lamp off.
Pairing BLU-RSM and Bluetooth adaptor with two way radio
1) In the power off state, long press microphone power on/off button for 8s, indicator into red and blue flash alternately.
2) When both BT mic and BT adapter red and blue indicator turn to blue flash slowly, pairing success.
3) Now you can press H3 PTT button to control radio and talk.
Paring BLU-RSM and mobile phone
1) Make sure the BLU-RSM close to mobile phone within 1meter.
2) Make sure the BLU-RSM is powered off.
3) Long press microphone “power on/off” button for 8s, indicator into red and blue flash alternately (Press minus “-” button to
while red/blue flashing alternatively. device need to press “-”during pairing stage).
4) Open mobile phone Bluetooth function, then search device “Blu-RSM”.
5) Select the device “Blu-RSM”and connect to mobile phone.
Remark：When the paired mobile phone connect to Speaker Mic, you don’t need to repair and Speaker Mic can connect to mobile
phone automatically at Bluetooth status. Or you can short press the switch button for a few second for the connection.
Phone call
1) When the Bluetooth speaker microphone connected with mobile phone, microphone can handle the phone calls.
2) Answer incoming call: When there is an incoming phone call, short press “power on/off” button to manual answer the call.
3) Reject incoming phone call: Quick double press “power on/off” button to reject a incoming phone call.
4) Hang up call: In call active state, short press “power on/off” button can hang up the call.
5) Audio transfer: In call active state, press the “power on/off” button for three seconds until the di tone to switch mobile phone
and Bluetooth microphone, press the “power on/off” button for three second until the di tone to switch Bluetooth microphone
back to cell phone.
6) Last number redial: Quick double press “power on/off” Button then the Mobile phone will dial out the last call out number.
(Note: Last number redial function requires the mobile phone support)
PTT talking
1) This function need to pair with Bluetooth Adapter and serve as PTT button to provide wireless communication.
2) Pair the Bluetooth Speaker Mic with Bluetooth Adapter.
3) After successfully paired, press PTT button to communicate with other two way radio.
4) If you want to terminate the conversation to other function, you need to switch off the Speaker Mic and Adapter first and
switch on Speaker Mic for other function such as connection with mobile phone.
Stereo music play control and Volume control
1) Play forward: Short press Vol+ Button to select next music.
2) Play backward: Short press Vol- Button to select previous music or song playback.
(Note: The above function requires the mobile phone supports Bluetooth A2DP and AVRCP.
3) Press “power on/off” button to play/pause music.
(Note: The above function requires the mobile phone supports Bluetooth A2DP and AVRCP).