Installation Instructions

4
STEP 1:
• Measure where your cut line will be.
• To get the cleanest cut possible, use painters tape on both sides of the cover panel where the cut is going
to be made.
• Once the tape has been placed onto the desired cutting area, mark your cut lines directly onto the painters tape.
STEP 2:
• When cutting, make sure the side of the cover panel that is going to be exposed is facing downward to help
prevent chipping.
• Using a high tooth-count blade, make the required cuts on the cover panel.
• Plan your installation to avoid any exposed cuts.
CUTTING A COVER PANEL