Installation Instructions

2
• When installing a wall cabinet cover panel, the cover panel should extend 13/16" past the front of the box to
be flush with the door. The cover panel will also extend 2-1/2" past the bottom of the box to accommodate
the wall cabinet bottom moulding.
• If a box length cover panel is desired, the cover panel will need to be cut. See cutting instructions on page 4.
COMMON COVER PANEL APPLICATIONS
Wall Cabinets
• When installing any base cabinet cover panel, the cover panel should extend 13/16" past the front of the
box to be flush with the door.
• A box length cover panel will not require cutting.
• A full length cover panel will require cutting to be flush with your floor and door. See cutting instructions
on page 4.
Base Cabinets