Installation Instructions

STEP 4:

• For the installation location of the drawer glides, reference the “Drawer Conﬁguration Guide” that was packaged

with your drawer kit.

• Line up the holes of the glides (478-9806/478-9807) with the holes in the cabinet box and secure with the euro

screws (478-9835).

• The drawer glides should be marked left (L) and right (R).

STEP 5:

• To install the drawer box, begin by fully extending both left and right drawer glides.

• Set the drawer box down onto the glides, covering as much of the drawer glide as possible. The drawer box should

be able to support itself on the drawer glides when you let go.

• Quickly and ﬁrmly push the drawer into the cabinet box. You should hear a “click” noise as this action will

automatically attach the drawer box to the glides. If the drawer box does not “click”, repeat Step 5. You may not

have pushed the drawer glides hard enough.

• Drawer kits are rated to hold 70 lbs. of weight.

Quick, ﬁrm push