Assembly Instructions

11
Attaching Cover Panels to Islands and Peninsulas:
Attachingcoverpanelstothebackofanislandorpeninsulawillrequiresomeadditionalstepsthan
standardcoverpanelinstallation.
Materials Needed:
• 1/2"FillerMaterial • 3/4"FinishingNails • 1-1/4"WoodScrews
Countertop
1/2"FillerMaterial
CoverPanelSeam
FinishedEnd
FinishedEnd
CoverPanel
*Whenislandorpeninsulalengthrequires
2coverpanels,aseamwillberequired.
Measureandcutsoseamisincenterof
cabinetrun.
CoverPanel
1)
Add1/2"materialtobottombackofcabinettomake
aushcoverpanelsecuringpoint.Use3/4"nishing
nailstoattach.
Cover Panel Installation Detail:
2)
Tofastencoverpaneltobackofcabinet,clampinto
placeandsecureusing1-1/4"screws(notprovided)
throughtheinteriorofthecabinetintothefastening
stripandadded1/2"material.
Usingscrewslongerthan1-1/4"putyouatriskofa
screwgoingthroughyourcoverpanel.
Payattentionofyourlayout.Ifyouhaveadiagonal
cornerbasecabinetwithasolidback,youwillwant
tousethescrewsthatareprovidedwithyourcover
panel.