Assembly Instructions

7
Exposedendsofcabinets(typicallyendofcabinetruns)willrequire
acoverpanel.Placecoverpanelontocabinet,lininguptobeush
tothetopofthecabinetbox,andushtothecabinetdoorordrawer
frontandsecurewithclamp.Fastenwith1-1/4"(included)screws
throughthepre-drilledshelfholesofthecabinetintothecoverpanel.
Note: In some applications, you may need to trim panel down. Some
cover panels are required in-between cabinets during the cabinet
installation process. All cover panels are called out on your oor plan
and elevation view printouts.
10)
11)
Clicktoekickclipintoplaceoncabinetleg.Settoekickandpush
downonclips,untiltoekickislockedintoplace.
INSTALL DOORS, DRAWERS, MOULDING AND TOE KICKS
Oncecabinetshavebeeninstalled,beginbuildingyourcongurationsusingdrawerkits,hingesand
otherhardwarecomponents.Allhardwarecomponentsincludeindividualinstallationinstructions.