SDS

Page 3/7
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) revised in 2012 and GHS Rev 03.
Issue date 06/29/2021 Reviewed on 06/29/2021
Trade Name: Dielectric Grease 3.3oz
53.1.5
·
Further information about storage conditions: None.
·
Specific end use(s): No further relevant information available.
8 Exposure Controls/Personal Protection
·
Additional information about design of technical systems: No further data; see section 7.
·
Control parameters:
·
Components with occupational exposure limits:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
·
Additional information: The lists that were valid during the creation of this SDS were used as basis.
·
Exposure controls:
·
Personal protective equipment
·
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Wash hands before breaks and at the end of work.
·
Breathing equipment: Not required.
·
Protection of hands: Not required.
·
Material of gloves: Not applicable.
·
Penetration time of glove material: Not applicable.
·
Eye protection:
Goggles recommended during refilling.
·
Limitation and supervision of exposure into the environment: None
9 Physical and Chemical Properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form: Semi-solid
Color: Translucent white
·
Odor: Mild
·
Odor threshold: Not determined.
·
pH-value: Not determined.
·
Change in condition
Melting point/Melting range: Not determined.
·
Flash point: 298.8 °C (569.8 °F)
·
Flammability (solid, gaseous): Not applicable.
·
Ignition temperature: Not applicable
·
Decomposition temperature: Not determined.
·
Auto igniting: Product is not self-igniting.
·
Danger of explosion: Product does not present an explosion hazard.
·
Explosion limits:
Lower: Not determined.
(Contd. on page 4)