SDS
05/20/2019Revision:
Page: 3 of 9
Klean Strip Brush Cleaner
SAFETY DATA SHEET
04/25/2019Supersedes Revision:
In Case of Inhalation:
4. FIRST AID MEASURES
Emergency and First Aid
Procedures:
**None known.
Note to Physician:
**Refer to section 2.
Signs and Symptoms Of
Exposure:
Immediately flush eyes with plenty of water. Get medical attention, if irritation persists.
In Case of Eye Contact:
Immediately flush skin with plenty of water. Remove contaminated clothing. Get
medical attention if irritation develops or persists. Wash clothing before reuse.
In Case of Skin Contact:
Do not induce vomiting unless directed to do so by medical personnel.
In Case of Ingestion:
If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for
breathing.
5. FIRE FIGHTING MEASURES
Flash Pt:
4.00 F Method Used: TAG Closed Cup
Self-contained respiratory protection should be provided for fire fighters fighting fires in
buildings or confined areas. Storage containers exposed to fire should be kept cool with
water spay to prevent pressure build-up. Stay away from heads of containers that have
been exposed to intense heat or flame.
Fire Fighting Instructions:
Vapors may travel to source of ignition and flash back.
Flammable Properties and
Hazards:
Autoignition Pt:
N.D.
Explosive Limits:
LEL: N.D. UEL: N.D.
NFPA Class IB
Use carbon dioxide, dry powder, or alcohol restistant foam.
Suitable Extinguishing Media:
Water stream may be ineffective and spread the fire.
Unsuitable Extinguishing
Media:
Oxides of carbon.
Hazardous Combustion
Products:
6. ACCIDENTAL RELEASE MEASURES
Vapors may cause flash fire or ignite explosively.
Clean up: Keep unnecessary people away; isolate hazard area and deny entry. Stay
upwind, out of low areas, and ventilate closed spaces before entering. Shut off ignition
sources; keep flares, smoking or flames out of hazard area. Use non-sparking tools.
Use proper bonding and grounding methods for all equipment and processes. Keep out
of waterways and bodies of water. Be cautious of vapors collecting in small enclosed
spaces, sewers, low lying areas, confined spaces, etc.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Do not use this product near any source of heat or open flame, furnace areas, pilot
lights, stoves, etc.
Precautions To Be Taken in
Handling:
Licensed to W.M. Barr and Company
GHS format