SDS

01/08/2018Revision:
01/08/2018Printed:
Page: 4
Klean-Strip Paint Sprayer Cleaner
SAFETY DATA SHEET
Dispose in accordance with applicable local, state and federal regulations.
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Precautions To Be Taken in
Handling:
When stored for an extended period of time, the product may separate into two layers
with the hazardous ingredient(s) on the top layer. Before use, mix the product by making
sure the container is tightly closed and gently shaking the container to agitate the two
layers back into solution.
Protect from freezing.
Keep container tightly closed when not in use.
Store in a cool, dry place.
Do not store near flames or at elevated temperatures.
Precautions To Be Taken in
Storing:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
PEL: 200 ppm
STEL: 500 ppm/(10min)
CEIL: 300 ppm
TLV: 200 mg/m3
64742-47-8 Hydrotreated light distillate (petroleum,
mineral spirits)
No data.
No data. No data.
112-34-5 Diethylene glycol monobutyl ether
{2-(2-Butoxyethoxy)ethanol {(a glycol
ether)}
No data.
PEL: 1000 ppm TLV: 250 ppm
STEL: 500 ppm
67-64-1 Acetone {2-Propanone}
No data.
For OSHA controlled work place and other regular users. Use only with adequate
ventilation under engineered air control systems designed to prevent exceeding
appropriate TLV. For occasional use, where engineered air control is not feasible, use
properly maintained and properly fitted NIOSH approved respirator for organic solvent
vapors. A dust mask does not provide protection against vapors.
Respiratory Equipment
(Specify Type):
Safety glasses, goggles or face shields are recommended to safeguard against potential
eye contact, irritation, or injury. Contact lenses should not be worn while working with
chemicals.
Eye Protection:
For OSHA controlled work place and other regular users, wear impermeable gloves to
prevent skin contact. Gloves contaminated with product should be discarded.
For occasional use, wear impermeable gloves to prevent extended or repeated contact
with the skin.
Protective Gloves:
Various application methods can dictate use of additional protective safety equipment,
such as impermeable aprons, etc., to minimize exposure.
Other Protective Clothing:
Use only with adequate ventilation to prevent build-up of vapors. Open windows and
doors if needed to provide fresh air. If strong odor is noticed or you experience slight
dizziness, headache, nausea, or eye-watering - Stop - ventilation is inadequate. Leave
area immediately.
Engineering Controls
(Ventilation etc.):
Wash hands thoroughly after use and before eating, drinking, smoking, or using the
restroom.
Do not eat, drink, or smoke in the work area.
Work/Hygienic/Maintenance
Practices:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format